Swipe - Coffee PIR Wall Lamp IP54

The Swipe combines a simple rectangular profile with a coffee brown finish for a contemporary architectural look. Its main body is made from powder-coated aluminium, while the light-emitting section is covered by a glossy opal polycarbonate diffuser.

The diffuser forms a bright contrasting panel against the darker body and can be rotated vertically. This adjustable construction changes both the appearance of the fitting and the direction in which its light is aimed.

A 21W integrated SMD LED module produces warm white light at 3000K. Ideal Lux specifies a light beam flux of 2300 lumens, a useful light flux of 1320 lumens, CRI above 80 and a 105° beam angle.

The light-emitting section is vertically adjustable through 0-350°, helping you aim illumination towards the area where it is most useful. The opal polycarbonate diffuser helps screen the individual LED components while providing direct illumination.

This sensor version incorporates PIR motion detection together with twilight sensing, making it suitable for locations where automatic exterior lighting is useful. The fitting is non-dimmable and operates with on/off sensor control. Its LED source is integrated rather than a replaceable bulb, and the electronic power supply is built into the fitting.

• Exterior entrance and doorway lighting
• Porches and covered approach areas
• Terraces and patio walls
• Exterior pathways beside a building
• Garage and side-access walls
• Contemporary and architectural exteriors
• Locations where automatic motion-activated lighting is useful

• Integrated 21W LED removes the need to purchase a separate bulb.
• Warm white 3000K output is suitable for residential exterior lighting.
• PIR motion sensing provides automatic activation when movement is detected.
• Twilight sensing supports automatic operation according to surrounding light levels.
• Vertically adjustable light section helps direct illumination where required.
• Glossy opal polycarbonate diffuser screens the LED source.
• IP54 protection suits normal outdoor wall installations exposed to weather.
• Powder-coated aluminium body provides a practical construction for exterior use.

• Combines exterior illumination, movement detection and twilight sensing in one fitting.
• Adjustable 0-350° lighting section provides substantially more directional flexibility than a fixed wall light.
• Integrated LED design keeps the front profile clean and eliminates a separate lamp choice.
• Compact 21.2 cm width suits entrances, pathways and exterior walls without requiring a large fitting.
• Coffee brown finish offers an alternative to more common black, white and anthracite exterior lighting.

Does the Ideal Lux Swipe 307176 need a separate bulb?

No. It uses a built-in 21W SMD LED module, so there is no separate bulb to purchase. The integrated light source provides warm white 3000K illumination.

Does this wall light have a motion sensor?

Yes. This version of the Swipe includes PIR motion detection together with a twilight sensor. These functions allow the exterior light to operate automatically according to movement and surrounding light conditions.

Can the direction of the light be adjusted?

Yes. The light-emitting section can be adjusted vertically through 0-350°. This wide adjustment range makes it possible to change where the direct light is aimed after the fitting has been installed.

Is the Ideal Lux Swipe 307176 suitable for outdoor use?

Yes. It carries an IP54 rating and is designed as an outdoor wall light. Typical locations include entrances, exterior walls, porches, terraces and pathways beside a building.

Is the Ideal Lux Swipe 307176 dimmable?

No. Ideal Lux specifies this integrated LED model as non-dimmable. It is designed for on/off operation with its PIR motion sensor rather than use with a dimmer switch.