Swipe - White PIR Wall Lamp IP54

The Swipe has a clean, rectangular form suited to contemporary exterior architecture. Its body is made from powder-coated aluminium in a white finish, paired with a glossy opal polycarbonate diffuser. The opal surface conceals the LED source and provides a more even visible light surface than an exposed LED module.

The diffuser section is adjustable, allowing the fitting angle to be adjusted after installation. Its projection can therefore vary from 12 cm to 16.5 cm, while the overall width remains 21.2 cm and the height 10 cm.

A built-in 21W LED module provides warm white 3000K illumination with a source output of 2300 lumens. The fitting has a useful light output of 1390 lumens, a CRI above 90 and a 105° beam angle. The high colour-rendering specification helps exterior colours and surfaces appear more natural under light.

The adjustable diffuser lets the direction of the light be altered to suit a doorway, wall, path or nearby surface. A PIR motion sensor and twilight sensor are integrated into this version, providing automatic operation when movement is detected under suitable low-light conditions. The LED source is integrated rather than replaceable, so no separate bulb is required.

This model is confirmed as non-dimmable.

• Exterior entrance and doorway lighting
• Patios, terraces and covered outdoor seating areas
• Garden walls and exterior walkways
• Side passages and access routes where motion sensing is useful
• Modern and contemporary house exteriors
• Locations where adjustable light direction is beneficial
• Outdoor installations requiring an IP54-rated wall fitting

• Integrated 21W LED means there is no separate bulb to purchase or fit.
• 2300 lumen LED source provides practical illumination for exterior areas.
• Warm white 3000K colour temperature suits entrances, patios and residential surroundings.
• CRI above 90 provides good colour rendering for surfaces and objects around the fitting.
• Adjustable diffuser helps direct the light towards the area where it is needed.
• Integrated PIR motion sensor supports automatic activation when movement is detected.
• Twilight sensing helps restrict automatic operation according to surrounding light levels.
• IP54 protection makes the fitting suitable for appropriate outdoor wall installations.
• Powder-coated aluminium body is paired with an opal polycarbonate diffuser.

• Combines exterior lighting, motion detection and twilight sensing in one wall-mounted fitting.
• Adjustable projection and light direction provide more positioning flexibility than a fixed wall light.
• Compact 21.2 cm by 10 cm format works well where a discreet rectangular fitting is preferred.
• Integrated warm white LED provides a complete light source without replaceable lamps.
• White finish and simple geometric styling suit a wide range of modern exterior schemes.
• IP54 protection supports use around entrances, paths, patios and other suitable outdoor locations.

Does the Ideal Lux Swipe 287720 have a motion sensor?

Yes. This Sensor version includes a PIR motion sensor together with a twilight sensor. The combination is designed to provide automatic lighting when movement is detected under suitable low-light conditions, making it particularly useful around entrances, paths and access areas.

Does this outdoor wall light need a separate bulb?

No. The Swipe 287720 has a built-in 21W LED module, so a separate bulb is not required. It produces warm white 3000K light with a source output of 2300 lumens.

Can the direction of the light be adjusted?

Yes. The diffuser is adjustable, which lets you alter the direction of illumination after the fitting has been mounted. Its projection from the wall varies from 12 cm to 16.5 cm depending on the selected position.

Is the Ideal Lux Swipe 287720 suitable for outdoor use?

Yes. It has an IP54 rating and is designed as an exterior wall light. It is suitable for appropriate outdoor locations such as entrances, patios, terraces, pathways and garden walls when correctly installed.

Can the Swipe 287720 be dimmed?

No. This integrated LED version is non-dimmable. Its built-in sensor system is intended for automatic on and off operation rather than adjustable brightness control.