Swipe - Coffee Wall Lamp IP54

Swipe has a clean, contemporary profile formed around a powder-coated aluminium body in a coffee brown finish. Its broad rectangular diffuser is fitted with a glossy opal polycarbonate screen, helping to soften the appearance of the integrated LED source while maintaining direct light output.

The diffuser can be rotated vertically through a wide adjustment range, changing both the direction of the light and the fitting's projection from the wall. At 21.2 cm wide and 10 cm high, the fitting has compact proportions that work well on modern exterior walls without appearing overly prominent.

An integrated 20.5W LED module produces warm white light at 3000K. The verified useful light output is 2300 lumens, with a 105° beam angle and CRI above 90 for good colour rendering. Light is emitted directly through the opal diffuser rather than from a replaceable bulb.

The diffuser is vertically adjustable through 0° to 350°, so the direction of illumination can be altered to suit the installation. This makes the fitting useful for directing light towards a path, entrance or nearby wall surface. Projection varies from 12 cm to 16.5 cm according to the diffuser position.

The LED module is integrated and is not designed as a user-replaceable light source. Ideal Lux specifies on/off operation and confirms that this model is non-dimmable.

• Exterior entrance and doorway lighting
• Patios and terraces
• Garden and exterior passageways
• Lighting beside exterior doors
• Modern residential facades
• Contemporary outdoor spaces
• Locations where adjustable directional light is useful

• Integrated 20.5W LED provides illumination without a separate replaceable bulb.
• 3000K warm white output suits residential entrances, patios and exterior circulation areas.
• CRI above 90 provides good colour rendering.
• Adjustable diffuser allows the direction of the light to be altered after installation.
• 105° beam angle provides a broad direct spread of light.
• Glossy opal polycarbonate diffuser screens the LED source.
• IP54 protection makes the fitting suitable for outdoor wall installation.
• Powder-coated aluminium body is designed for exterior use.
• Compact 21.2 cm width suits installations where a relatively unobtrusive wall fitting is preferred.

• Adjustable construction provides more control over light direction than a fixed wall light.
• Integrated LED combines the light source and fitting in one compact design.
• IP54 protection supports installation on exterior walls exposed to normal outdoor conditions.
• Coffee brown finish offers an alternative to more common black, white and anthracite exterior fittings.
• Warm white light and CRI above 90 suit applications where comfortable illumination and accurate colour appearance are important.

Is the Ideal Lux Swipe 307169 suitable for outdoor use?

Yes. It is an outdoor wall light with an IP54 rating, providing protection against limited dust ingress and splashing water. It is suitable for exterior walls around entrances, terraces, patios and passageways.

Can the direction of the light be adjusted?

Yes. The diffuser has a vertical adjustment range of 0° to 350°. This allows the direct light to be aimed to suit the installation, while the projection of the fitting varies from 12 cm to 16.5 cm.

Does this wall light need a separate bulb?

No. Swipe 307169 has an integrated 20.5W LED module, so there is no separate bulb to purchase. The integrated light source is not designed to be replaced by the user.

What colour light does it produce?

The integrated LED produces 3000K warm white light. It has a useful output of 2300 lumens, a 105° beam angle and CRI above 90, providing good colour rendering for exterior residential areas.

Is the Ideal Lux Swipe 307169 dimmable?

No. Ideal Lux specifies this version for on/off operation and confirms that it is non-dimmable.