Swipe - Anthracite PIR Wall Lamp IP54

The Swipe has a clean rectangular profile suited to contemporary exterior architecture. Its light body is made from powder-coated aluminium in an anthracite finish, paired with a glossy opal polycarbonate screen that softens the appearance of the integrated LED source. The diffuser is adjustable through a vertical range of 0 to 350 degrees, so its angle can be changed after installation. The fitting measures 21.2 cm wide and 10 cm high, while its depth varies from 12 cm to 16.5 cm depending on the diffuser position.

An integrated 21W LED module produces warm white light at 3000K. The official technical data lists a light beam flux of 2300 lumens, with a 105-degree beam angle and CRI above 80. The direct light output can be aimed by rotating the adjustable diffuser, making it useful for illuminating entrances, paths beside a wall and other exterior areas.

The fitting includes both PIR motion detection and twilight sensing, so the light can operate automatically according to movement and ambient light conditions. It uses an integrated electronic power supply and is designed for 220-240V AC, 50/60Hz mains installation. The integrated LED is non-dimmable.

• Exterior entrance and doorway lighting
• Porches and covered outdoor areas
• Terraces and patio walls
• Exterior walls beside paths and access routes
• Locations where automatic motion-activated lighting is useful
• Contemporary homes and modern exterior schemes
• Outdoor positions requiring an IP54 rated wall light

• Integrated 21W LED removes the need to purchase a separate bulb.
• 3000K colour temperature provides warm white exterior lighting.
• PIR motion sensor can activate the light when movement is detected.
• Twilight sensor supports automatic operation according to surrounding light levels.
• Adjustable diffuser rotates vertically through 0 to 350 degrees for directional control.
• IP54 protection makes the fitting suitable for appropriate outdoor wall locations.
• Powder-coated aluminium body provides a neat anthracite exterior finish.
• Glossy opal polycarbonate screen covers and diffuses the LED source.

• Combines exterior lighting, motion detection and twilight sensing in one wall-mounted fitting.
• Adjustable light direction gives greater flexibility than a fixed wall light.
• Integrated LED provides a complete light source without replaceable bulbs.
• Compact dimensions suit entrances, terraces and exterior walls where projection needs to remain controlled.
• IP54 protection is suitable for outdoor applications exposed to dust and splashing water.

Does the Ideal Lux Swipe 287713 include the light source?

Yes. The fitting has a built-in 21W LED module, so no separate bulb is required. The integrated LED produces warm white light at 3000K.

Does this outdoor wall light have a motion sensor?

Yes. The Swipe 287713 includes a PIR motion sensor as well as a twilight sensor. These allow the fitting to respond automatically to movement and surrounding light conditions.

Can the direction of the light be adjusted?

Yes. The diffuser can be rotated vertically through 0 to 350 degrees. This lets you change the direction of the direct light output after the fitting has been installed.

Is the Ideal Lux Swipe 287713 suitable for outdoor use?

Yes. It has an IP54 rating, providing protection against dust ingress and splashing water. It is designed as an outdoor wall light for locations such as entrances, porches, terraces and exterior walls.

Is the integrated LED dimmable?

No. The official technical specification identifies the integrated LED system as non-dimmable.