Swipe - White Wall Lamp IP54

Swipe has a clean, geometric appearance with a white powder-coated aluminium body and a broad adjustable front section. The light passes through a glossy opal polycarbonate screen, which conceals the LED source and gives the illuminated face a smooth, uniform appearance. Its simple rectangular proportions suit contemporary exterior architecture without adding unnecessary decorative detail. The fitting measures 21.2 cm across and 10 cm high, while its projection varies from 12 cm to 16.5 cm depending on the position of the adjustable diffuser.

The fitting uses an integrated 20.5W SMD LED module, so no separate replaceable bulb is required. It produces 3000K warm white light with a measured light beam flux of 2000 lumens and a useful light flux of 1390 lumens. The 105° beam provides broad direct illumination for exterior walls and nearby surfaces.

The diffuser is vertically adjustable through a 0° to 350° range, making it possible to alter the direction of the light after installation. This is useful where illumination needs to be directed towards a wall, pathway, doorway or surrounding area rather than fixed in one position. The manufacturer specifies on/off operation and confirms that this model is non-dimmable.

• Exterior entrance and doorway lighting
• Patio and terrace walls
• Garden and pathway walls
• Contemporary house facades
• Outdoor areas requiring adjustable light direction
• Residential or commercial exterior walls
• Locations suited to an IP54 rated wall fitting

• Integrated 20.5W LED removes the need to purchase a separate bulb.
• 3000K colour temperature provides warm white exterior lighting.
• Adjustable diffuser helps direct the light towards the area where it is needed.
• 105° beam angle provides broad direct light distribution.
• Glossy opal polycarbonate screen softens the appearance of the illuminated LED surface.
• IP54 protection makes the fitting suitable for outdoor wall installation.
• Powder-coated aluminium body provides a practical exterior construction.
• Compact 21.2 cm width suits locations where a relatively discreet wall fitting is preferred.

• Combines an integrated LED source with an adjustable directional design.
• White finish and simple geometric shape work well with modern exterior architecture.
• Wide diffuser adjustment offers greater control over where the light is directed.
• IP54 protection supports use on exterior walls exposed to normal outdoor conditions.
• Warm white 3000K output is suitable for entrances, patios and other exterior living areas.

Does the Ideal Lux Swipe 287690 need a separate bulb?

No. It has a built-in 20.5W SMD LED module, so there is no separate replaceable bulb to purchase. The integrated LED provides 3000K warm white light.

Can the direction of the light be adjusted?

Yes. The diffuser has a vertical adjustment range of 0° to 350°. This allows the light direction to be changed to suit a doorway, wall, pathway or nearby exterior area.

Is this outdoor wall light dimmable?

No. Ideal Lux specifies this version of the Swipe wall light as non-dimmable with standard on/off operation.

Can the Swipe 287690 be installed outdoors?

Yes. It carries an IP54 rating and is designed as an outdoor wall light. This provides protection against limited dust ingress and splashing water, making it suitable for normal exterior wall applications.

What colour light does it produce?

The integrated LED produces 3000K warm white light. Its broad 105° beam and adjustable diffuser make it suitable for illuminating entrances, patios, exterior walls and nearby pathways.