Swipe - Black Wall Lamp IP54

Swipe has a compact, geometric appearance with a powder-coated aluminium body in a black finish. The rectangular front diffuser is made from glossy opal polycarbonate, creating a clean contrast against the darker housing while concealing the integrated LED source.

The diffuser section is adjustable, so its angle can be changed rather than remaining in one fixed position. This functional movement is incorporated into the simple architectural design, making the fitting suitable for modern exterior walls, rendered facades, brickwork and contemporary entrance areas.

An integrated 20.5W LED module provides direct warm white light at 3000K. The current Ideal Lux technical data gives a source output of 2300 lumens, with a 105° beam angle and CRI above 90 for accurate colour rendering.

The adjustable diffuser helps direct the light where it is needed, making Swipe suitable for illuminating areas around doors, pathways, patios and exterior walls. Its projection varies from 12 cm to 16.5 cm as the diffuser position changes.

This version operates on standard on/off control and is non-dimmable. The LED module is integrated and is not designed as a user-replaceable bulb. A built-in electronic driver is included, with driver replacement restricted to qualified operators.

• Exterior entrance and doorway lighting
• Patios, terraces and covered outdoor seating areas
• House facades and contemporary exterior walls
• Lighting alongside paths and access areas
• Modern residential properties
• Commercial exterior wall applications
• Locations where adjustable directional light is useful

• Integrated 20.5W LED source removes the need to purchase a separate bulb.
• Warm white 3000K output is well suited to entrances, patios and residential exterior spaces.
• Adjustable diffuser changes the direction of the direct light output.
• IP54 protection makes the fitting suitable for appropriate outdoor wall installations.
• CRI above 90 provides good colour rendering of surrounding surfaces and objects.
• 105° beam angle provides a broad direct spread of light.
• Powder-coated aluminium body provides the main exterior structure.
• Glossy opal polycarbonate screen conceals the LED source and forms the visible diffuser.
• Compact 21.2 cm width suits locations where a large wall fitting would be intrusive.

• Combines exterior-rated construction with a clean contemporary appearance.
• Adjustable light direction provides more flexibility than a fixed wall light.
• Integrated LED technology provides a complete light source within the fitting.
• High colour rendering with CRI above 90 is useful where natural-looking colours are desirable.
• Its black finish and restrained rectangular form work with a wide range of modern exterior schemes.
• Suitable for mains-wired wall installation on residential or commercial properties.

Is the Ideal Lux Swipe 287706 suitable for outdoor use?

Yes. It has an IP54 rating and is designed as an outdoor wall light. This provides protection against limited dust ingress and splashing water, making it suitable for appropriate exterior wall locations such as entrances, patios and facades.

Does this wall light need a separate bulb?

No. Swipe 287706 contains an integrated 20.5W LED module, so there is no separate bulb to purchase or fit. The integrated LED provides warm white 3000K light.

Can the direction of the light be adjusted?

Yes. The diffuser is adjustable, enabling the direct light output to be angled to suit the installation. Its projection varies from 12 cm to 16.5 cm depending on the diffuser position.

Is the Ideal Lux Swipe 287706 dimmable?

No. The current Ideal Lux technical specification identifies this version as non-dimmable with on/off control.

How bright is the integrated LED?

Ideal Lux specifies a 2300 lumen source flux. The LED operates at 3000K warm white with a 105° beam angle and CRI above 90.