Dynamite - Black 4 Spotlights

Four matt black cylinders sit in a row on a narrow metal bar with a powder-coated finish. The geometry is strict and simple, closer to architectural track lighting than to a decorative fixture. Black gives the fitting presence: on a white ceiling, it reads as a deliberate graphic line, and in darker interiors, it ties in with black taps, handles, window frames and other hardware. The same model is also made in white and brass, plus shorter three-light and compact cluster versions, so a whole property can be specified from one family.

Each of the four GU10 heads angles independently, which turns one ceiling point into four separate beams. Aim two at a worktop and two at a splashback, or spread all four evenly down a hallway. Light distribution along the 38.5 cm bar avoids the single bright spot that a compact cluster produces in narrow rooms. Bulb changes take seconds thanks to the standard GU10 lampholders.

Compatible with:

• GU10 LED bulbs (max 28W per lampholder)
• Dimmable GU10 bulbs, when paired with a suitable dimmer switch
• Warm white bulbs
• Cool white bulbs

For dimming to work properly, the bulbs and the dimmer switch need to be matched to each other.

• Kitchens, mounted along worktops, islands or galley runs
• Hallways, corridors and landings
• Home offices, aimed at the desk and the wall behind it
• Living rooms, highlighting shelving, artwork or a media wall
• Bedrooms and dressing areas
• Industrial, monochrome and contemporary interiors

• Four heads that adjust independently, each covering its own zone
• Linear 38.5 cm bar carries light along the room instead of concentrating it
• Slim 5.7 cm depth keeps a low profile against the ceiling
• Matt black finish coordinates with black fixtures and fittings elsewhere in the room
• Standard GU10 lampholders mean cheap, widely available replacement bulbs
• Matching Dynamite fittings are available for walls, ceilings and track systems

• Delivers the effect of a row of downlights without cutting holes in the ceiling
• The bar format suits long, narrow spaces better than a round cluster
• Surface-mounted installation on a standard ceiling, controlled from the wall switch
• Made by Ideal Lux, an established Italian manufacturer widely stocked across Europe

Is this ceiling light dimmable?

It is compatible with dimmable GU10 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer need to be matched to each other for dimming to work properly.

Do the heads move?

Yes. All four spotlight heads adjust independently, so each beam can point at a different part of the room. Once set, they hold their position.

What bulbs does it take?

Standard GU10 bulbs, up to 28W per lampholder, four in total. GU10 LED bulbs are the practical choice, and both warm white and cool white versions fit.

Is this fitting suitable for a narrow room?

Yes, that is where the linear format works best. The 38.5 cm bar with a 5.7 cm depth follows the direction of a corridor, galley kitchen or desk run, spreading four adjustable beams along the space.