Dynamite - Satin Brass 4 Spotlights

The bar and the four cylindrical heads share a metal construction in a brass finish, giving the fitting a warmer, softer character than the usual black or white spotlight hardware. Brass sits naturally alongside timber, deep greens, navy and terracotta, and picks up on brass taps, handles and cabinet hardware used elsewhere in a room. The form stays restrained: a slim bar, four clean cylinders, nothing decorative added. Black and white versions of the same fitting exist for projects that mix finishes, along with shorter three-light and compact cluster formats.

The four GU10 heads pivot independently, so one fitting produces four separately aimed beams. Spread them evenly along a hallway, or split them between a worktop and the wall behind it. Because the heads sit spaced along the bar rather than grouped at one point, coverage in long rooms is more even than a compact cluster can manage. Replacing a bulb means twisting out a standard GU10, available in any supermarket or DIY shop.

Compatible with:

• GU10 LED bulbs (max 28W per lampholder)
• Dimmable GU10 bulbs, when paired with a suitable dimmer switch
• Warm white bulbs
• Cool white bulbs

For dimming to work properly, the bulbs and the dimmer switch need to be matched to each other.

• Kitchens with brass hardware, mounted along worktops or islands
• Hallways, corridors and landings
• Living rooms, aimed at shelving, artwork or seating areas
• Bedrooms and dressing rooms
• Home offices and studies
• Contemporary, mid-century and warm minimalist interiors

• Four independently angled heads, each covering a separate zone
• Brass finish adds warmth in a format usually limited to black and white
• 38.5 cm linear bar distributes light along the room rather than from one point
• Slim 5.7 cm depth keeps the fitting discreet against the ceiling
• Standard GU10 lampholders for quick, low-cost bulb replacement
• Coordinates with the rest of the brass Dynamite range across walls, ceilings and track

• Covers a long space from one fitting, with no ceiling cutting required
• The linear shape follows corridors and worktop runs, where clusters look awkward
• Simple surface-mounted installation, operated from the existing wall switch
• Made by Ideal Lux, an established Italian lighting manufacturer

Is this ceiling light dimmable?

It is compatible with dimmable GU10 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer need to be matched to each other for dimming to work properly.

Can each spotlight be aimed separately?

Yes. The four heads adjust independently, so you can direct one at a worktop, another at a wall and so on, all from a single ceiling fitting.

Which bulbs fit this light?

It takes four standard GU10 bulbs, up to 28W each. GU10 LEDs in warm white or cool white are the usual choice and keep running costs low.

Will the brass finish match my other fittings?

The Dynamite collection includes wall lights, compact ceiling clusters, pendants and track spots in the same brass finish, so the whole scheme can be kept consistent. Brass also works alongside brass taps, handles and cabinet hardware.