Bloom - Black Pendant with White Glass ∅ 22 cm

The Bloom pendant combines a black metal ceiling rose and frame with a rounded diffuser made from white acid-etched blown glass. Its softly curved form gives the fitting a clean, decorative appearance without adding excessive visual detail. A black PVC suspension cable continues the contrasting monochrome design from the ceiling rose to the shade.

The pendant uses one replaceable E27 bulb, giving you control over the brightness and colour temperature of the finished installation. LED bulbs are compatible and are a practical option for efficient everyday lighting. The bulb is enclosed by the white acid-etched glass diffuser, which reduces direct glare and produces a softer outward light than a completely exposed lamp.

The overall height can be adjusted from approximately 100 cm to 275.6 cm during installation. This makes it possible to create a lower decorative drop above a dining table or raise the fitting where greater clearance is required.

It is compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

• Dining tables and breakfast tables
• Kitchen islands and peninsulas
• Bedside pendant lighting
• Hallways and entrance areas
• Reading corners and smaller seating areas
• Contemporary and minimalist interiors
• Modern classic rooms with black accents

• White acid-etched glass helps soften the appearance of the light.
• Blown glass construction gives each diffuser subtle individual variation.
• Adjustable suspension supports installation at a suitable height for the room.
• One replaceable E27 bulb makes future bulb changes straightforward.
• LED compatibility allows the output and colour temperature to be selected separately.
• Black ceiling rose, frame and cable create a coordinated finish.
• A compact 22 cm diameter suits individual use or installation in a repeated arrangement.
• Class II construction provides double-insulated electrical protection.

• Combines a simple monochrome finish with a softly rounded glass form.
• Offers a diffused lighting effect rather than leaving the bulb fully exposed.
• Can be positioned over tables, worktops or open areas using the adjustable suspension.
• Accepts widely available E27 bulbs, including compatible LED options.
• Works as a single pendant or as part of a row above a longer surface.

Is the bulb included with the pendant?

No. The Bloom SP1 D22 Nero requires one E27 bulb, which must be purchased separately. An LED bulb can be selected in the brightness and colour temperature most suitable for the room.

Can this pendant be dimmed?

Yes. It is compatible with a dimmable E27 bulb when connected to a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

Can the hanging height be adjusted?

Yes. The suspension can be adjusted during installation, with an overall height ranging from approximately 100 cm to 275.6 cm. This allows the pendant to be positioned above a table, island or open floor area.

Is this light suitable for a bathroom?

The fitting has an IP20 rating and is intended for dry indoor locations. It is not designed for areas exposed to water or high levels of moisture, so a suitably rated bathroom light should be used instead.

Does the glass completely hide the bulb?

The bulb sits inside a white acid-etched glass diffuser. The glass obscures a clear view of the lamp and helps soften its light, although the final brightness will depend on the E27 bulb selected.