Bloom - Black Wall Lamp with White Glass ∅ 11.5 cm

The Bloom wall light has a compact, rounded silhouette with an organic shape that appears decorative whether illuminated or switched off. Its striped black frame provides a defined contrast against the layered glass diffuser.

The diffuser is made from blown glass with a white acid-etched inner section and a satin black outer surface. This combination partially conceals the bulb and creates a softer visual appearance than an exposed lamp. At approximately 11.5 cm across, the fitting can be used individually as a subtle wall accent or installed in a coordinated arrangement along a larger wall.

The fitting uses one replaceable G9 LED bulb with a maximum permitted power of 4W. A 3W, 3000K G9 LED bulb is supplied, producing warm white light suitable for relaxed residential spaces. The acid-etched glass diffuses the output around the rounded shade rather than leaving the light source directly exposed.

As a mains-wired wall fitting, it is compatible with a dimmable G9 bulb when paired with a suitable external dimmer switch. The supplied bulb should only be treated as dimmable where its lamp specification explicitly confirms this. The bulb and dimmer switch need to be matched to each other for dimming to work properly.

The replaceable light source means the bulb can be changed when necessary without replacing the complete fitting.

• Bedside wall lighting in contemporary bedrooms
• Decorative accent lighting in living rooms
• Hallways, landings and entrance areas
• Dining rooms requiring a compact wall feature
• Installing in pairs on either side of a mirror or artwork
• Modern and elegant interiors with black details
• Dry indoor spaces where a small wall projection is useful

• Compact 11.5 cm diameter suits walls with limited available space.
• Projects only around 11.7 cm, helping the fitting remain relatively unobtrusive.
• White acid-etched glass softens the appearance of the illuminated bulb.
• Satin black outer glass adds depth to the rounded diffuser.
• Black frame coordinates with black furniture, handles and interior details.
• Replaceable G9 bulb simplifies future lamp replacement.
• Included warm white LED bulb allows the fitting to be used after installation.
• Suitable for dimming when an appropriate dimmable bulb and compatible dimmer are used.
• Class II construction provides double-insulated electrical protection.

• The compact size provides decorative wall lighting without a large or deep structure.
• Layered blown glass gives the light a more distinctive appearance than a basic globe fitting.
• The black and white colour combination works with a broad range of contemporary palettes.
• A replaceable bulb provides more practical long-term maintenance than a sealed light source.
• The included LED bulb removes the need to select a separate lamp before initial use.
• Its diffuse output is suitable for accent and supplementary lighting in residential rooms.

Is a bulb included with the Bloom wall light?

Yes. The fitting is supplied with a replaceable 3W G9 LED bulb in a warm white 3000K colour temperature. The lamp can be replaced when required, provided the replacement is a suitable G9 LED bulb within the fitting's 4W maximum.

Can this wall light be dimmed?

It can be used with a dimmable G9 LED bulb and a suitable external wall dimmer. Check that the chosen bulb is explicitly labelled as dimmable. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

Is it suitable for a bathroom?

The Bloom AP1 D12 Nero has an IP20 rating and is intended for dry indoor areas. It should not be installed in bathroom zones or other locations where it may be exposed to moisture, condensation or splashing water.

How far does the light project from the wall?

The fitting projects approximately 11.7 cm from the wall and measures around 11.5 cm in diameter. Its compact proportions make it suitable for hallways, bedside positions and other areas where a deeper wall light could feel intrusive.

Does the glass provide direct or diffused light?

The white acid-etched blown glass acts as a diffuser, softening the appearance of the G9 bulb and distributing light around the rounded shade. It is best suited to decorative, accent or supplementary lighting rather than high-output task lighting.