Bloom - Black Ceiling Lamp with White Glass ∅ 22 cm

The Bloom PL1 D22 combines a rounded glass profile with a frame finished in black. Its satin black outer glass introduces a subtle smoked tone, while the white acid-etched blown glass diffuser forms a softer inner layer around the light source.

The contrasting finishes give the ceiling light a contemporary appearance without making it visually heavy. At 220 mm in diameter, it is compact enough for smaller spaces but still provides a noticeable decorative feature when viewed from below or across the room.

This ceiling light uses one E27 bulb, which must be purchased separately. The replaceable lampholder allows the customer to select an LED bulb with a preferred brightness and colour temperature, subject to the fitting's verified 42W traditional bulb maximum.

The acid-etched white diffuser surrounds the bulb and helps produce a softer, more comfortable lighting effect than an exposed lamp. The rounded glass construction allows light to spread around the fitting rather than directing it into a narrow beam.

As a mains-wired ceiling fitting with a replaceable E27 bulb, it is compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

• Hallways, landings and entrance areas
• Bedrooms and dressing rooms
• Smaller living rooms or dining spaces
• Rooms with standard or lower ceiling heights
• Modern and contemporary interiors
• Decorative hotel or hospitality settings
• Indoor areas that do not require moisture protection

• Compact ceiling-mounted design avoids the drop of a pendant light.
• Layered black and white glass creates a distinctive decorative appearance.
• White acid-etched diffuser helps soften direct glare from the bulb.
• Replaceable E27 bulb provides flexibility over brightness and colour temperature.
• Compatible with energy-efficient E27 LED bulbs.
• Single light source keeps bulb replacement straightforward.
• Approximately 22 cm diameter suits smaller rooms and circulation areas.
• Class II construction provides double-insulated electrical protection.

• A practical alternative to a pendant where ceiling clearance is limited.
• Glass construction provides visual interest when switched on or off.
• The E27 lampholder makes future bulb replacement simple.
• Its compact proportions allow it to be used individually or repeated through a hallway.
• Neutral black and white finishes coordinate with a broad range of interior colours.
• Diffused illumination is well suited to general ambient lighting.

Is the bulb included with the Bloom ceiling light?

No. The Ideal Lux Bloom 366586 requires one E27 bulb, which must be purchased separately. An LED bulb can be selected to provide the preferred brightness and colour temperature for the room.

Can this ceiling light be dimmed?

Yes, it is compatible with a dimmable E27 bulb when connected to a suitable wall dimmer. The bulb and dimmer switch must be compatible with each other for reliable dimming performance.

Is it suitable for a low ceiling?

Its ceiling-mounted form projects approximately 21.5 cm, so it is generally more practical than a suspended pendant where headroom is limited. The available clearance and position of doors or furniture should still be checked before installation.

Can the Bloom 366586 be installed in a bathroom?

The fitting has an IP20 rating and is intended for dry indoor locations. It is not protected against water, so it should not be installed within bathroom zones that require a moisture-resistant or higher IP-rated fitting.

What type of light does the glass produce?

The white acid-etched diffuser surrounds the bulb and helps soften direct glare. Light can spread around the rounded glass form, creating general ambient illumination rather than a narrow or strongly directional beam.