Cotton - White Semi Flush with White Glass ∅ 30 cm

The Cotton PL1 D30 has a smooth, rounded profile formed by an acid-etched white blown-glass diffuser. Its softly curved shape gives the ceiling light a clean and understated look that works well in modern and simple decorative interiors.

A metal ceiling base finished in white powder paint supports the glass and keeps the visible colour scheme consistent. The diffuser is secured using a screw fastening, creating a neat appearance while allowing access to the replaceable bulb when required.

This ceiling light uses one E27 bulb, which must be purchased separately. The replaceable lampholder gives you flexibility to select a suitable LED bulb with the brightness and colour temperature preferred for the room.

The acid-etched white glass surrounds the light source and helps soften glare while spreading light in several directions. This makes the fitting suitable for general ambient lighting rather than a narrow or directional beam.

Compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

With an IP20 rating, the Cotton is designed for dry indoor areas and should not be installed where it may be exposed to moisture or water.

• Bedrooms requiring softly diffused general lighting
• Living rooms with modern or understated interiors
• Hallways and landings in dry indoor areas
• Dining rooms where a low-profile ceiling light is preferred
• Home offices and studies
• Rooms with standard or moderately low ceilings
• Interiors using white, neutral or light colour schemes

• Acid-etched white glass softens the visible light from the bulb.
• Rounded 30 cm diffuser provides a compact decorative ceiling feature.
• Single E27 lampholder supports readily available replaceable LED bulbs.
• Replaceable bulb design allows the light output and colour temperature to be selected separately.
• White powder-coated base coordinates neatly with the glass diffuser.
• Screw-fastened diffuser provides access for bulb replacement.
• Dimming is possible with a compatible dimmable bulb and suitable wall dimmer.
• IP20 construction is suitable for dry rooms throughout the home.

• Offers a softer appearance than an open-bulb ceiling fitting.
• Projects approximately 25 cm from the ceiling, avoiding the long drop of a pendant.
• Uses a replaceable bulb rather than a permanently integrated light source.
• Its simple white finish is easy to coordinate with a range of room colours.
• The enclosed rounded diffuser creates an even visual presence from different viewing angles.

Is the bulb included?

No. The Cotton PL1 D30 requires one E27 bulb, which must be purchased separately. An LED bulb allows you to choose a suitable brightness and colour temperature for the room.

Can this ceiling light be dimmed?

Yes, it is compatible with a dimmable E27 bulb when connected to a suitable dimmer switch. The bulb and dimmer switch need to be matched to each other for dimming to work properly.

Is it suitable for a bathroom?

The fitting has an IP20 rating and is intended for dry indoor rooms. It is not designed for installation in bathroom zones or other areas where it may be exposed to moisture or splashing water.

How far does the light project from the ceiling?

The fitting is approximately 25 cm high and 30 cm in diameter. Its compact rounded form makes it suitable where a decorative glass ceiling light is wanted without the extended drop of a suspended pendant.

What type of light does the glass produce?

The acid-etched white glass surrounds the bulb and helps diffuse its light. The result is a softer general light with less direct glare than an exposed-bulb fitting, although the final brightness depends on the bulb selected.