Mib - IP65 White LED Flush 3000K

MIB has a simple square form measuring 30 cm by 30 cm, with a depth of only 5 cm. The base is made from aluminium with a white powder-coated finish, while an opal plastic diffuser covers the light source. This diffuser gives the front of the fitting a clean, uniform appearance and softens the visibility of the individual LEDs. Its restrained shape works particularly well with modern architecture, rendered walls, covered outdoor spaces and interiors where a minimal surface-mounted light is required.

The fitting uses an integrated 18W LED source, so separate bulbs are not required. It produces 1950 lumens with a warm white colour temperature of 3000K and a wide 110° beam angle. The broad direct light distribution is useful for illuminating entrances, terraces, passageways and other circulation areas without relying on a narrow spotlight beam.

The opal diffuser helps distribute the LED output across the square face of the fitting. MIB is designed for on/off operation and is non-dimmable. It can be surface mounted on either a ceiling or wall, giving flexibility when planning exterior lighting around a property. The integrated LED source is serviceable only by suitably qualified personnel rather than being replaced like a conventional bulb.

• Outdoor entrances and doorways
• Covered terraces and verandas
• Porches and sheltered exterior seating areas
• Balconies and external passageways
• Wall or ceiling mounting on modern facades
• Bathrooms and other suitable indoor areas where IP65 protection is beneficial
• Contemporary homes and commercial exterior spaces

• Integrated 18W LED means no separate bulb purchase is required.
• 1950 lumen output provides useful general illumination for entrances and outdoor circulation areas.
• Warm 3000K light offers a softer appearance than cooler white exterior lighting.
• Wide 110° beam distributes light across a broad area rather than concentrating it into a narrow spot.
• IP65 protection makes the fitting suitable for outdoor use where dust and water exposure are considerations.
• Opal diffuser helps create an even illuminated surface and reduces direct visibility of the LEDs.
• Wall or ceiling mounting provides flexibility for different architectural layouts.
• Slim 5 cm depth keeps the fitting close to the mounting surface.

• Combines a discreet square design with practical outdoor IP65 protection.
• Provides integrated LED lighting without the need to select replacement bulbs.
• Suitable for both horizontal ceiling installation and vertical wall mounting.
• Its 30 cm square format provides a substantial illuminated surface without projecting far from the wall or ceiling.
• The neutral white finish is easy to coordinate with many contemporary exterior colour schemes.

Can the Ideal Lux MIB 269122 be used outdoors?

Yes. The fitting has an IP65 rating, providing protection against dust and water jets. This makes it suitable for exterior locations such as entrances, terraces, porches and covered outdoor circulation areas when correctly installed.

Does this light need a separate bulb?

No. MIB uses an integrated 18W LED light source, so there is no conventional replaceable bulb to purchase. The integrated LED produces 1950 lumens of warm 3000K light.

Can it be installed on a wall as well as a ceiling?

Yes. The fitting is designed for surface mounting on either a ceiling or a wall. This makes it useful where the same square lighting design is required across several exterior mounting positions.

Is the Ideal Lux MIB 269122 dimmable?

No. This version is designed for standard on/off operation and is non-dimmable.

How large is the fitting?

The square front measures 30 cm by 30 cm and the fitting projects only 5 cm from the mounting surface, giving it a relatively slim profile for a surface-mounted outdoor light.