Mib - IP65 White LED Flush 3000K

The MIB has a straightforward round design with a white powder-coated aluminium base and an opal plastic diffuser. The diffuser covers most of the visible face of the fitting, creating a broad illuminated surface rather than exposing individual LEDs.

Its 30 cm diameter gives it enough visual presence for entrances and larger wall areas without making the fitting bulky. With a depth of just 5 cm, the low-profile shape keeps it close to the wall or ceiling. The simple white finish and minimal detailing suit contemporary homes, utility areas and exterior settings where an unobtrusive light is preferred.

A 20W integrated LED light source is built into the fitting, so no separate bulb is required. It produces warm white light at 3000K, with an opal diffuser helping to spread the light across the broad circular face rather than concentrating it into a narrow beam.

The fitting is rated IP65, meaning it is protected against dust ingress and water jets. This makes it suitable for many exterior wall and ceiling applications as well as appropriate indoor areas where increased moisture protection is useful. Installation must still comply with the relevant electrical regulations for the chosen location.

The LED source and its control gear are integrated and identified by Ideal Lux as non-replaceable components. Product-specific retailer information also identifies this version as non-dimmable.

• Exterior entrance and doorway lighting
• Covered terraces and balconies
• Exterior walls and ceilings requiring IP65 protection
• Porches and sheltered access areas
• Utility and circulation areas
• Contemporary residential exteriors
• Locations where a slim 5 cm projection is useful

• Integrated 20W LED means there is no separate bulb to purchase or fit.
• 3000K colour temperature provides warm white illumination.
• IP65 protection makes the fitting suitable for a wide range of outdoor applications.
• Opal plastic diffuser spreads the LED light across a broad illuminated surface.
• White powder-coated aluminium base gives the fitting a clean, understated appearance.
• 30 cm diameter provides useful coverage while retaining a simple circular form.
• Only 5 cm deep, helping the fitting sit close to its mounting surface.
• Designed for either wall or ceiling mounting, offering greater placement flexibility.

• Combines an integrated LED source with a weather-resistant IP65 enclosure.
• Can be mounted horizontally on a ceiling or vertically on a wall.
• Low-profile construction is useful where a deep or projecting fitting would be unsuitable.
• Neutral white styling works easily with many contemporary exterior finishes.
• Opal diffusion provides a softer visible light surface than an exposed LED arrangement.

Does the Ideal Lux MIB 269115 need a separate bulb?

No. The light uses a built-in 18W LED source, so there is no separate bulb to purchase. The integrated LED produces warm white light at a colour temperature of 3000K.

Can this light be installed outdoors?

Yes. The MIB 269115 has an IP65 rating, providing protection against dust and water jets. This makes it suitable for many exterior wall and ceiling locations when installed in accordance with the relevant electrical regulations.

Can the MIB 269115 be mounted on a wall as well as a ceiling?

Yes. Ideal Lux describes the MIB PL ROUND as a wall and ceiling light, so the round fitting can be installed vertically on a suitable wall or horizontally on a suitable ceiling.

Is the Ideal Lux MIB 269115 dimmable?

No. Product-specific technical information identifies this integrated LED version as non-dimmable, so it is intended for standard on and off operation rather than use with a dimmer.

Can the integrated LED be replaced?

No. Ideal Lux technical documentation identifies both the LED light source and the control gear as non-replaceable components. The fitting should therefore be treated as a complete integrated LED luminaire.