Mib - IP65 White LED Flush 4000K

The MIB has a simple circular profile designed to sit close to the mounting surface. Its base is made from aluminium with a white powder-coated finish, paired with an opal plastic diffuser that covers the integrated LED source. The combination creates a clean, understated appearance that works well with contemporary exterior architecture and practical interior spaces.

At 30 cm in diameter and 5 cm high, the fitting has a relatively low-profile form. The white finish and plain round diffuser make it easy to coordinate with light-coloured ceilings, walls and exterior surfaces without introducing unnecessary decorative detail.

An integrated 18W LED module produces 2150 lumens of useful light at a neutral white 4000K colour temperature. The LED source itself is rated at 2150 lumens, while the useful output accounts for the light delivered by the complete fitting. A CRI above 90 helps colours appear natural and clearly defined.

The opal diffuser and 110° beam angle provide broad, direct illumination rather than a narrow spotlight effect. This makes the fitting suitable for general lighting over entrances, terraces, passageways and similar areas.

The LED module is integrated and is not designed to be replaced. The electronic driver is built into the fitting and can be replaced by a qualified operator. This model uses on/off control and is non-dimmable.

• Covered entrances and exterior doorways
• Porches and sheltered terraces
• Outdoor ceiling and wall installations
• Passageways and practical circulation areas
• Utility rooms and similar functional spaces
• Moisture-prone locations where an IP65 fitting is appropriate
• Contemporary interiors and exteriors needing neutral white light

• Integrated 18W LED source removes the need for separate bulbs.
• 2150 lumen useful output provides practical general illumination.
• 4000K neutral white light is well suited to entrances, work areas and circulation spaces.
• CRI above 90 supports accurate and natural-looking colour rendering.
• Wide 110° beam spreads light across a broad area.
• IP65 protection suits demanding outdoor and moisture-prone locations.
• Low 5 cm profile keeps the fitting close to the wall or ceiling.
• Suitable for wall or ceiling mounting, providing flexibility when planning an installation.
• Built-in electronic driver can be replaced by a qualified operator.

• A compact 30 cm round fitting for areas where a shallow profile is useful.
• IP65 protection makes it suitable for a wider range of exterior applications.
• Wall or ceiling mounting offers more installation flexibility than a ceiling-only fitting.
• Neutral white 4000K light provides clear illumination for practical spaces.
• The opal diffuser and wide beam angle help distribute light over a broad area.
• Integrated LED technology provides a complete light source without separate lamp selection.

Can the Ideal Lux MIB 202945 be used outdoors?

Yes. The fitting has an IP65 rating and is designed as an outdoor ceiling or wall light. Its level of protection makes it suitable for locations where the fitting may be exposed to dust and water.

How bright is the MIB 202945?

The fitting provides 2150 lumens of useful light output from its integrated 18W LED module. It produces neutral white 4000K light with a wide 110° beam, making it suitable for broad general illumination rather than focused accent lighting.

Is this light dimmable?

No. The Ideal Lux MIB 202945 is specified for standard on/off operation and is non-dimmable.

Can the LED be replaced?

The integrated LED module is not replaceable. The electronic driver is built into the fitting but is designed to be replaceable by a qualified operator.

Can it be mounted on a wall as well as a ceiling?

Yes. Manufacturer technical information identifies the MIB as suitable for ceiling or wall mounting, so its slim round form can be positioned to suit the layout of the area being illuminated.