Berenice - Antique Brass 3 Light Centre Fitting with Crystal

The Berenice has three curved arms arranged around a central ceiling plate, creating the balanced outline of a small chandelier without a hanging chain or cable. Its steel structure is finished in antique brass, bringing a warm metallic tone to the design.

Each arm supports a decorative clear glass shade with a deeply faceted, cut-glass appearance. These angular surfaces catch and refract light, adding visible sparkle when the fitting is illuminated. The combination of clear glass and antique brass suits traditional interiors while remaining easy to coordinate with transitional and decorative contemporary schemes.

Three E14 lamp holders spread the light across separate points around the fitting rather than relying on one central bulb. The clear faceted shades allow the selected bulbs to remain visible and help break up the light as it passes through the glass.

The fitting accepts up to 7W LED per lamp holder, and the bulbs must be purchased separately. Light output and colour temperature can therefore be selected to suit the room, from warmer lighting for lounges and bedrooms to brighter general illumination for dining spaces and hallways.

Compatible with dimmable E14 LED bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly. As an IP20 fitting, it is intended for dry indoor areas.

• Living rooms requiring a decorative central ceiling light
• Dining rooms with standard or moderately low ceilings
• Bedrooms with classic or transitional decor
• Hallways and entrance areas where headroom is important
• Traditional interiors with antique brass accents
• Rooms featuring clear glass or crystal-style accessories
• Dry indoor spaces requiring three-point illumination

• Semi-flush construction reduces the drop compared with a suspended chandelier.
• Three lamp holders distribute light from several positions around the room.
• Clear faceted glass shades add sparkle and decorative detail.
• Antique brass finish introduces a warm, traditional metallic accent.
• Replaceable E14 bulbs allow control over brightness and colour temperature.
• Compatible with energy-efficient LED lamps up to 7W per bulb.
• Dimming compatibility supports adjustable light levels with suitable equipment.
• Part of the coordinated Endon Berenice lighting collection.

• Provides chandelier-inspired styling without a long hanging suspension.
• Combines warm antique brass with light-catching clear glass.
• Suitable for several commonly used living and circulation spaces.
• Allows the bulbs to be selected and replaced independently.
• Offers optional dimming when installed with compatible bulbs and controls.
• Coordinates with other fittings in the Berenice range.

Are the bulbs included with the Endon Berenice 107801?

No. Three E14 LED bulbs must be purchased separately. This allows you to select a suitable brightness, colour temperature and appearance for the room.

Can this ceiling light be dimmed?

Yes. It is compatible with dimmable E14 LED bulbs when used with a suitable wall dimmer. The bulbs and dimmer switch must be compatible with each other for reliable dimming.

Is the Berenice 107801 suitable for a low ceiling?

Its semi-flush construction is more suitable for limited ceiling height than a long pendant or chain-hung chandelier. The fitting projects approximately 41 cm from the ceiling, so available headroom should still be checked before installation.

Can this fitting be installed in a bathroom?

The fitting has an IP20 rating and is intended for dry indoor areas. It should not be installed in bathroom zones or other locations where protection from moisture or splashing water is required.

What rooms suit this three-light ceiling fitting?

Its 45.6 cm diameter and decorative semi-flush design make it suitable for living rooms, dining rooms, bedrooms, hallways and entrance areas, subject to the room size and available ceiling height.