Rudy - Black 3 Light Spotlights

The Rudy has a clean, contemporary appearance with three compact cylindrical spot heads mounted along a slim rectangular base. Its die-cast aluminium construction is powder coated in black, creating a simple finish suited to modern and minimalist interiors.

Each spotlight can be rotated and tilted independently, so the appearance can also be adjusted according to where the heads are directed. The compact 5.5 cm diameter spotlight bodies keep the overall design neat and unobtrusive.

Three GU10 light sources provide direct illumination from separate adjustable points. Each head can rotate and tilt, making it possible to direct the beams towards a kitchen worktop, dining area, artwork, shelving or other areas that need more focused light.

Three replaceable 7W GU10 LED bulbs are included. Each supplied bulb produces 540 lumens at a warm white 3000K colour temperature with CRI 90, providing good colour rendering for everyday interior lighting.

The supplied bulbs are non-dimmable. The fitting uses standard replaceable GU10 lamps, so dimmable GU10 bulbs can be used when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched for dimming to work properly.

• Kitchens where directional light is useful over work surfaces
• Living rooms requiring adjustable accent or general lighting
• Dining areas where several light directions are useful
• Hallways and circulation spaces
• Home offices and work areas
• Highlighting artwork, shelving or architectural details
• Modern and minimalist interiors

• Three separately adjustable spot heads help direct light to different areas.
• Rotating and tilting heads provide greater control over beam direction.
• Replaceable GU10 lamps make future bulb replacement straightforward.
• Includes three 7W LED bulbs, so separate lamps are not required initially.
• Warm white 3000K supplied bulbs suit general domestic interior lighting.
• CRI 90 supplied lamps provide good colour rendering.
• Powder-coated die-cast aluminium construction gives the fitting a clean black appearance.
• IP20 rating makes it suitable for dry indoor areas.

• Three adjustable light sources provide more positioning flexibility than a fixed ceiling light.
• The slim 54 cm linear design can cover a useful area without hanging into the room.
• Replaceable GU10 bulbs allow the light source to be changed when required.
• Supplied LED bulbs provide a ready-to-use warm white lighting setup.
• The black finish and simple cylindrical heads suit a wide range of contemporary interiors.

Are the bulbs included with the Ideal Lux Rudy 229058?

Yes. Three replaceable 7W GU10 LED bulbs are supplied. Each produces 540 lumens with a warm white 3000K colour temperature and CRI 90 colour rendering.

Can I adjust the direction of each spotlight?

Yes. All three cylindrical spot heads can be rotated and tilted independently. This makes it possible to aim light towards different areas of the room rather than directing all three beams in the same direction.

Is the Rudy 229058 dimmable?

The supplied GU10 LED bulbs are non-dimmable. Dimmable GU10 bulbs can be fitted when used with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

Can this spotlight be used in a bathroom?

The fitting has an IP20 rating and is intended for dry indoor locations. It does not provide the moisture protection normally required for bathroom zones, so its proposed position should be checked against applicable bathroom electrical requirements.

How large is the fitting?

The current Ideal Lux technical information gives an overall length of 54 cm, with a height and depth of approximately 12.5 cm. Its linear format makes it useful where several adjustable light sources are needed along one ceiling position.