Axis - Black Bollard with Clear Diffuser IP44

The Axis outdoor post features a lantern-shaped head supported by a straight, slim column and a circular mounting base. Its black powder-coated finish provides a simple, coordinated appearance suitable for both modern and more traditional outdoor settings.

Clear polycarbonate panels surround the light source, while the projecting roof adds a recognisable lantern detail. The panels leave the bulb visible and permit light to pass through the sides of the fitting.

Constructed from ABS and polycarbonate rather than conventional metal and glass, the light combines familiar lantern styling with practical outdoor materials. Its 45 cm height makes it suitable for lower-level garden and pathway installations.

The Axis post light uses one replaceable E27 bulb, which is not included. An E27 GLS-shaped LED bulb is the specified lamp format. The clear polycarbonate panels allow light from the bulb to spread outwards through the lantern head, providing illumination around the fitting.

The manufacturer's electrical specification lists a 25W lamp rating without identifying a specific LED wattage limit. For LED replacement, a bulb up to 3W is recommended under the applicable replacement guidance.

The PIR sensor provides automatic motion-activated operation in dark conditions. According to the installation instructions, its operating characteristics include:

• Motion detection angle of 120°.
• Activation when surrounding light falls below 20 lux.
• Fixed illumination period of 1 minute after activation.
• Automatic timer restart when further movement is detected.
• Fixed sensitivity and operating settings.

The instructions specify a maximum detection range of 6 metres when the sensor is mounted at a height of 2.5 metres. As this post light stands 45 cm high, that published maximum should not be treated as its guaranteed detection distance when installed at ground level.

The IP44 rating provides protection against splashing water, making the fitting suitable for appropriate outdoor locations. Its Class II double-insulated construction is confirmed in the manufacturer's documentation.

• Garden pathways where low-level lighting helps define walking routes.
• Driveway borders and approach areas requiring occasional illumination.
• Patio edges and outdoor seating areas.
• Front garden entrances and residential access paths.
• Landscaped borders, planted areas and garden features.
• Traditional or modern classic exterior designs.
• Contemporary outdoor spaces where a simple black lantern design is preferred.

• Compact 45 cm post height - provides a low-level lighting option for garden paths and borders.
• Black powder-coated finish - creates a coordinated appearance with other black exterior fittings.
• Clear polycarbonate panels - allow light to pass through the lantern head while enclosing the bulb.
• ABS and polycarbonate construction - uses materials suited to the fitting's outdoor application.
• IP44 protection - suitable for outdoor exposure to splashing water.
• Replaceable E27 lampholder - enables the light source to be replaced without replacing the complete fitting.
• LED-compatible design - supports the use of a suitable energy-efficient E27 bulb.
• PIR motion detection - provides automatic activation when movement is detected in sufficiently dark conditions.
• Fixed one-minute activation period - switches the light off after the operating period unless further movement restarts the timer.
• Class II insulation - provides double-insulated electrical construction.

• Combines the appearance of a traditional outdoor lantern with a compact post format suitable for modern gardens.
• Provides a practical option for pathway and border lighting where taller bollards may be unnecessary.
• Offers motion-activated illumination in dark conditions rather than requiring continuous operation.
• Uses a replaceable E27 bulb, so the light source can be selected to suit the intended application.
• Can be coordinated with other designs in the Searchlight Axis outdoor lighting collection.
• Includes an IP44 rating and double-insulated construction for appropriate outdoor installation.

Does the Searchlight Axis outdoor post light include a bulb?

No. The fitting requires one E27 bulb, which must be purchased separately. A GLS-shaped LED bulb is the specified format. A suitable LED replacement up to 3W is recommended, giving you the option to select the colour temperature for your outdoor space.

How does the PIR motion sensor work?

The sensor activates the light when movement is detected, and ambient light is below 20 lux. The light remains on for one minute, with further movement restarting the timer. The detection angle is 120°, and the sensitivity and operating duration are fixed rather than adjustable.

What is the motion sensor detection distance?

The installation leaflet specifies a maximum range of 6 metres at a mounting height of 2.5 metres. As this is a 45 cm garden post, the actual detection distance at its normal installation height may differ. The published figure should not be treated as a guaranteed ground-level range.

Can this garden post light be installed outdoors?

Yes. The Axis has an IP44 rating, providing protection against splashing water. It is intended for suitable outdoor locations such as garden paths, patios and entrance areas. It should not be installed where it may be submerged or subjected to high-pressure water jets.

Is this post light suitable for a garden pathway?

Yes. At 45 cm high, the Axis is designed for lower-level garden and pathway lighting. Its clear panels permit light to spread around the lantern head, while motion activation can provide illumination when someone approaches in dark conditions. Multiple fittings may be used along longer pathways.