Dynamite - Satin Brass 4 Light Linear Fitting

The Dynamite pendant has a long, narrow metal body with four compact square spotlight heads arranged in a straight line. A satin brass finish gives the fitting a warm metallic appearance while retaining the simple geometry of the design.

Each spotlight can be adjusted independently, adding visual flexibility as well as practical control over the direction of the light. Slim suspension cables support the body beneath a compact square ceiling plate, helping the 76 cm wide fitting maintain a light, uncluttered appearance.

Four GU10 LED bulbs are positioned along the pendant, providing separate points of directional light. Each included bulb uses 7W and produces 540 lumens at a warm white colour temperature of 3000K. The adjustable spotlight heads can be aimed towards a table, island, worktop or selected areas of the room.

The fitting accepts GU10 bulbs up to the manufacturer’s stated maximum of 28W per lamp holder. The supplied LED bulbs can also be replaced when a different beam angle, colour temperature or brightness is preferred.

As a mains-wired pendant with replaceable bulbs, it is compatible with dimmable GU10 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly. The included bulbs should only be dimmed where their individual specification confirms dimming compatibility.

• Dining tables requiring adjustable directional lighting
• Kitchen islands and breakfast bars
• Worktops and preparation areas
• Open-plan kitchens and dining spaces
• Contemporary living rooms
• Home offices and meeting tables
• Interiors with brass or warm metallic accents

• Four separately positioned lights distribute illumination along a 76 cm linear fitting.
• Adjustable spotlight heads help direct light towards different parts of the surface below.
• Four 7W GU10 LED bulbs are included for immediate use after installation.
• Warm white 3000K light is suitable for kitchens, dining areas and living spaces.
• Replaceable bulbs provide flexibility over future brightness, beam angle and colour temperature.
• Adjustable suspension height accommodates both standard and taller ceilings.
• Satin brass finish introduces a warm decorative accent without an ornate appearance.
• Class II construction does not require an earth connection.

• Combines a linear pendant format with individually adjustable spotlights.
• Provides targeted illumination across tables, islands and work surfaces.
• Includes four energy-efficient LED bulbs rather than requiring an immediate separate purchase.
• Offers a broad adjustable height range for different ceiling and furniture arrangements.
• Uses standard GU10 lampholders, making replacement bulbs widely available.
• Pairs a clean contemporary form with a warm satin brass finish.

Are the bulbs included with the Ideal Lux Dynamite 371399?

Yes. Four 7W GU10 LED bulbs are included. Each supplied bulb produces 540 lumens of warm white 3000K light, so separate bulbs are not required for the initial installation.

Can the four spotlights be adjusted separately?

Yes. Each square spotlight head can be repositioned independently. This makes it possible to direct the light towards different areas of a dining table, kitchen island, worktop or other surface below the pendant.

Is the suspension height adjustable?

Yes. The fitting has an installation height range of 40 cm to 220 cm. The required drop should be set during installation to suit the ceiling height and the position of the table, island or work surface.

Can this pendant be dimmed?

The fitting can be used with dimmable GU10 bulbs and a compatible wall dimmer. Dimming capability depends on the bulbs installed, so confirm that both the bulbs and dimmer are designed to work together.

Is the Dynamite pendant suitable for a bathroom?

No. Its IP20 rating is intended for dry indoor locations and does not provide protection against water. The fitting is better suited to kitchens, dining rooms, living spaces, offices and similar dry interiors.