Tronco - IP65 Anthracite Bollard with Diffuser 25 cm

The Tronco has a compact cylindrical body made from die-cast aluminium and finished in anthracite. A clear Pyrex glass diffuser forms the central illuminated section, with aluminium elements positioned inside the glass. This combination gives the fitting a structured architectural look while leaving the light source visible through the clear diffuser.

At 25 cm high and 15.5 cm in diameter, it sits relatively low to the ground, making it particularly suited to repeated placement along pathways, borders and other areas where a full-height bollard would be unnecessary.

This outdoor bollard uses one replaceable E27 bulb, which is not included. LED bulbs are compatible, allowing the light output and colour temperature to be chosen according to the required application rather than being fixed by an integrated light source.

The clear Pyrex glass diffuser exposes the lamp and allows light to spread around the fitting from a single central source. The IP65 rating provides protection against dust and water jets, making the Tronco suitable for permanent outdoor installation in areas such as paths, entrances, terraces and landscaped gardens.

Compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

• Garden paths and pedestrian routes
• Driveway edges and entrance areas
• Patios and terraces
• Landscaped borders and planting areas
• Contemporary exterior schemes
• Low-level exterior lighting layouts
• Repeated installation along paths or boundaries

• Compact 25 cm height provides low-level exterior illumination without the scale of a tall bollard.
• IP65 protection makes the fitting suitable for exposed outdoor installation.
• Die-cast aluminium construction is designed for exterior lighting applications.
• Anthracite finish works naturally with contemporary paving, dark window frames and modern exterior finishes.
• Clear Pyrex glass keeps the light source visible and allows light to spread around the fitting.
• Replaceable E27 lamp holder provides flexibility when choosing an appropriate bulb.
• Compatible with LED bulbs for a wide choice of light output and colour temperature.
• Class I construction provides an earthed electrical installation arrangement.

• Provides a compact alternative to taller outdoor posts and bollards.
• Combines an anthracite exterior finish with a clear glass diffuser for a simple architectural appearance.
• The replaceable E27 bulb makes future lamp replacement straightforward.
• IP65 protection suits paths, terraces, entrances and other exposed exterior locations.
• Its 15.5 cm diameter and 25 cm height make it practical for repeated use throughout a coordinated outdoor lighting scheme.

Is the bulb included with the Ideal Lux Tronco 369761?

No. The fitting uses one replaceable E27 bulb, which must be purchased separately. LED bulbs are compatible, so you can select a suitable light output and colour temperature for your outdoor space.

Can this bollard be used outdoors in exposed areas?

Yes. The Tronco 369761 has an IP65 rating, providing protection against dust and water jets. It is designed for exterior applications including pathways, terraces, entrances, driveways and landscaped areas.

Is the Ideal Lux Tronco 369761 dimmable?

It is compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

How large is this outdoor bollard?

The fitting is 25 cm high and 15.5 cm in diameter. Its compact proportions make it particularly useful for low-level lighting beside paths, entrances, planting areas and terraces.