Tronco - IP65 White Bollard with Diffuser 25 cm

The Tronco has a clean cylindrical shape with a white varnished finish that gives it a simple, contemporary appearance. Its die-cast aluminium body surrounds a clear Pyrex glass diffuser, while aluminium elements are positioned inside the glass section. The combination of opaque white surfaces and transparent glass keeps the design visually light while still giving the fitting a defined architectural form.

At 25 cm high and 15.5 cm in diameter, it is compact enough for use beside paths, patios, steps and planting areas without becoming visually dominant.

This outdoor pedestal light uses one replaceable E27 bulb, which is not included. The clear Pyrex glass diffuser leaves the chosen bulb visible while the surrounding aluminium components help define the fitting's characteristic cylindrical appearance.

The published maximum for the lampholder is 42W for a traditional bulb. No product-specific maximum LED wattage could be verified, so an LED bulb up to 5W is the appropriate FindALight replacement recommendation for this fitting. LED compatibility gives flexibility to choose the brightness and colour temperature required for the location.

As a mains-wired fitting with a standard replaceable E27 lampholder, it is compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

Its IP65 rating makes the fitting suitable for outdoor environments where protection from dust and water is required.

• Garden pathways and landscaped areas
• Terrace and patio edges
• Outdoor entrances and approach routes
• Low-level lighting beside steps or paved areas
• Contemporary garden schemes
• Residential and suitable commercial outdoor spaces
• Locations requiring an IP65-rated outdoor fitting

• Compact 25 cm height suits low-level outdoor lighting applications.
• 15.5 cm diameter gives the fitting a substantial cylindrical presence without excessive height.
• White varnished die-cast aluminium body provides a clean contemporary finish.
• Clear Pyrex glass diffuser protects the lamp while keeping the light source visible.
• Single E27 lampholder allows the bulb to be replaced when required.
• LED-compatible for lower-energy bulb options.
• IP65 protection makes it suitable for exposed outdoor installation.
• Compatible with dimmable E27 bulbs and a suitable dimmer switch.

• Provides a compact alternative to taller outdoor bollards.
• Suitable for repeated installation along paths, terraces and landscaped boundaries.
• Replaceable E27 lamp format gives flexibility over brightness and colour temperature.
• IP65 protection supports use in exposed exterior areas.
• The white finish can coordinate with light-coloured walls, paving and contemporary outdoor schemes.

Is the bulb included with the Ideal Lux Tronco 366050?

No. The fitting requires one E27 bulb, which must be purchased separately. This gives you flexibility to select an LED bulb with the brightness and colour temperature that suits the outdoor area.

Can I use an LED bulb in this outdoor light?

Yes. The E27 lampholder is LED compatible. No product-specific maximum LED wattage has been published for this exact fitting, so an LED bulb up to 5W is recommended based on the verified 42W traditional bulb maximum.

Is the Ideal Lux Tronco 366050 suitable for outdoor use?

Yes. It has an IP65 rating, which provides protection against dust and water jets. This makes it suitable for exposed outdoor areas such as pathways, terraces, entrances and landscaped spaces when correctly installed.

Is this outdoor pedestal light dimmable?

It is compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

How large is the Tronco 366050?

The fitting is 25 cm high and 15.5 cm in diameter. Its relatively low height makes it useful where a compact pedestal light is preferred instead of a taller outdoor bollard.