Techo - Surface-Mounted Anthracite Ceiling Light IP54

The Techo has a clean cubic shape with a 15 cm by 15 cm footprint and an anthracite powder-coated finish. Its body is made from die-cast aluminium, creating a simple architectural appearance that suits contemporary outdoor settings. A tempered glass diffuser is positioned across the underside of the fitting and has a frosted finish, softening the visible lamp while retaining the product's direct downward lighting arrangement. The restrained square design makes it easy to coordinate with modern exterior finishes, rendered walls, brickwork and dark window or door frames.

This ceiling light uses one replaceable GU10 bulb and directs its light downwards through the tempered glass diffuser. A bulb is not included, so the lamp can be selected to suit the required brightness and colour temperature. Ideal Lux specifies a maximum of 20W for the GU10 light source and recommends a GU10 LED lamp for this fitting.

The fitting is rated IP54, providing protection against limited dust ingress and splashing water from any direction. This makes it suitable for appropriate outdoor ceiling locations such as porches and covered terraces. The manufacturer's technical information identifies this model as non-dimmable, so it should be used as an on/off fitting rather than with a dimming control.

• Covered entrance areas and exterior doorways
• Porches and entrance canopies
• Covered terraces and patios
• Sheltered balconies with a suitable ceiling mounting point
• Contemporary exterior schemes using anthracite or dark finishes
• Bathrooms or other moisture-prone interiors where IP54 is suitable for the chosen installation position

• IP54 protection makes the fitting suitable for appropriate outdoor ceiling installations.
• Die-cast aluminium body provides a defined square architectural form.
• Anthracite powder-coated finish suits many contemporary exterior colour schemes.
• Tempered glass diffuser covers the underside of the lamp compartment.
• Direct downward light is useful above entrances, walkways and covered seating areas.
• Replaceable GU10 lamp holder allows the bulb to be replaced without changing the complete fitting.
• Compatible with GU10 LED bulbs, allowing a suitable brightness and colour temperature to be selected.
• Compact 15 cm square footprint suits locations where a larger outdoor ceiling light would be visually intrusive.

• Combines a compact square shape with a practical IP54 outdoor rating.
• Uses an easily replaceable GU10 light source rather than a permanently integrated LED module.
• Direct downward illumination is well suited to ceiling positions above entrances and covered outdoor areas.
• Anthracite finish provides a neutral dark option for contemporary exterior architecture.
• The 15 cm square dimensions make it straightforward to use individually or as repeated fittings along a covered area.

Is the GU10 bulb included?

No. The Ideal Lux Techo 251516 requires one GU10 bulb, which must be purchased separately. This allows you to select a suitable LED bulb with the brightness and colour temperature required for the installation.

Can this ceiling light be used outdoors?

Yes. The Techo 251516 is designed as an outdoor ceiling light and has an IP54 rating. It is suitable for appropriate exterior ceiling positions such as covered entrances, porches and terraces, subject to correct installation.

Is the Ideal Lux Techo 251516 dimmable?

No. Ideal Lux specifies this particular Techo model as non-dimmable, so it should be installed for standard on/off operation rather than connected to a dimming control.

What size is the fitting?

The fitting is 15 cm wide by 15 cm deep and has a height of 16 cm from the mounting surface. Its compact square proportions make it suitable for individual use or repeated installation along a covered outdoor area.

What direction does the light shine?

The Techo provides direct downward light through the tempered glass diffuser on the underside of the fitting. This makes it particularly useful above entrances, covered pathways and other areas where light is required beneath the mounting point.