Dynamite - Satin Brass Spotlight

A single round spotlight head sits on a small mounting base, with the metal frame plated and brushed to a satin brass finish. The warm metallic tone reads softer than chrome and less showy than polished gold, which makes it easy to place alongside timber, dark paintwork and natural stone.

With a 5.5 cm diameter and 16.5 cm projection, the fitting stays deliberately small and unobtrusive. The design is about the light it produces rather than the fitting itself, which suits minimalist and industrial style rooms particularly well.

The fitting takes a single GU10 bulb (maximum 28W), which is included in the box. The adjustable diffuser is the key feature: the head can be angled after installation, so the beam lands exactly where it is needed. That makes it useful as task lighting over a counter or desk, or as accent lighting picking out a picture, alcove or architectural detail.

Because it mounts to either a ceiling or a wall, the same fitting works above kitchen worktops, beside a bed as a directional reading light, or along a hallway ceiling in a repeated row.

Compatible with:

• GU10 LED bulbs
• Dimmable GU10 bulbs (with a compatible dimmer switch)
• Warm white bulbs
• Cool white bulbs

Compatible with dimmable GU10 bulbs, when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

• Accent lighting for artwork, shelving and alcoves
• Task lighting over kitchen worktops and desks
• Bedside reading light mounted on the wall
• Hallways and landings, singly or in a row
• Living rooms needing flexible directional light
• Contemporary, industrial and mid century interiors
• Retail displays, cafes and other commercial interiors

• Adjustable spotlight head - direct the beam exactly where you want it, even after installation
• Mounts to ceiling or wall - one fitting covers both uses
• Compact 5.5 cm diameter head with 16.5 cm projection - discreet enough for small rooms and tight corners
• GU10 lampholder with the bulb included - ready to install, with cheap and widely available replacements
• Satin brass finish - adds warmth without dominating the room
• Works singly or in multiples - build up a flexible lighting scheme one spot at a time

• A simple, flexible way to add directional light without installing a track system
• Ceiling and wall mounting from the same fitting means it can move with you or change role in a redecorated room
• Standard GU10 bulbs keep running costs low with LED and make replacements easy
• Made by Ideal Lux, an established Italian lighting manufacturer
• Matches the wider Dynamite collection, including four and six light bar pendants, for a coordinated scheme

Is a bulb included?

Yes. The fitting comes with a GU10 bulb, so it is ready to install. Replacement GU10 LED bulbs are inexpensive and available everywhere when it eventually needs changing.

Is this spotlight dimmable?

Compatible with dimmable GU10 bulbs, when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

Can I mount it on a wall as well as a ceiling?

Yes. It is designed for surface mounting on either a ceiling or a wall, and the adjustable head lets you angle the light correctly in both positions.

Can the direction of the light be changed?

Yes. The diffuser is adjustable, so the beam can be re-aimed at any time - useful if you rearrange furniture or artwork later.

Is it suitable for a bathroom or outdoors?

No. With an IP20 rating it is intended for dry indoor rooms only, not for bathroom zones or outdoor use.