Hotel - Black Mother & Child LED Wall Lamp with Black Shade

The Hotel AP2 All Black has a clean, contemporary appearance with a black metal structure and matching black fabric shade. A satin glass diffuser is incorporated with the main shaded light, helping soften the illumination from the E27 bulb.

Below the shade, a slender flexible reading arm extends from the wall plate and ends in a compact LED head. Keeping the shade, frame and reading arm in the same black finish gives the fitting a coordinated look that works particularly well beside a bed or in modern hospitality interiors.

Two different light sources provide separate types of illumination. The main fabric-shaded section takes one E27 bulb, which is purchased separately and provides diffused general light. The manufacturer recommends an 8W E27 LED bulb for this part of the fitting.

The second source is an integrated 1.5W LED reading light producing 55 lumens at source and 45 useful lumens. Its warm white 3000K colour temperature and focused 23° beam are suited to close-range reading. The flexible arm lets the LED head be directed where required.

The fitting uses built-in on/off switching and is specified by Ideal Lux as non-dimmable. The integrated LED module is replaceable by a qualified operator only.

• Bedside wall lighting in bedrooms
• Hotel and guest-room bedside installations
• Reading beside a bed without using a table lamp
• Modern and contemporary interiors
• Guest houses and serviced accommodation
• Rooms where both diffused and directional light are useful

• Two light sources combine general bedside lighting with a focused reading light.
• Flexible LED arm can be aimed towards the required reading position.
• E27 lampholder allows the main bulb to be replaced when required.
• Integrated 3000K LED provides warm white directional illumination.
• 23° LED beam concentrates the reading light rather than spreading it broadly across the room.
• Black fabric shade softens the appearance of the main E27 light source.
• Built-in switches provide convenient control directly from the wall fitting.
• Compact 11 cm body depth helps keep bedside areas uncluttered.

• Combines ambient and task lighting in one wall-mounted fitting.
• Useful bedside alternative to using separate wall and table lamps.
• Adjustable reading arm provides greater control over the direction of focused light.
• Replaceable E27 main bulb gives flexibility when choosing the primary light source.
• Coordinated all-black design suits a wide range of contemporary bedroom schemes.

Are the light sources included?

The integrated 1.5W LED reading light is included, but the E27 bulb used behind the fabric shade is not. Ideal Lux specifies an 8W E27 LED bulb as the recommended lamp for the main light.

Can the reading light be adjusted?

Yes. The integrated LED is mounted on a flexible arm, so the small reading head can be repositioned to direct its focused 23° beam towards a book or another nearby area.

Is the Ideal Lux Hotel 215709 dimmable?

No. Ideal Lux specifies this model as non-dimmable with on/off operation. The fitting includes built-in switching for convenient bedside control.

Is this wall light suitable for a bathroom?

It has an IP20 rating and is designed for indoor use. It is not intended for locations requiring increased protection against moisture or water, so its proposed bathroom position should be checked against applicable installation requirements.

How large is the wall light?

The fitting measures 32 cm wide, 22.5 cm high and 11 cm deep. Its relatively shallow projection makes it particularly practical beside beds where keeping bedside surfaces clear is useful.