Highclere - Vintage Brass 3 Light Semi Flush with Natural Linen Shade

The Highclere combines a vintage brass-plated finish with a cylindrical natural linen shade. The shade is made from 100% natural linen and has a matching coloured cotton inner, giving the fitting a coordinated appearance from both the outside and underneath. Its warm brass tone contrasts with the softer neutral fabric, making it suitable for interiors that combine classic detailing with simple contemporary shapes. The 40 cm diameter gives the shade enough presence for main-room use without the drop associated with a pendant fitting.

Three E14 lampholders are positioned within the shade, distributing light from several points across the fitting. Each lampholder accepts an LED bulb up to 6W, and bulbs are not included. E14 candle-shaped bulbs are a suitable choice for this fitting.

The linen shade helps soften the appearance of the light passing through the fabric, while the open underside also allows useful illumination into the room below. The fitting is compatible with dimmable E14 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

With a projection of 34 cm, the close-to-ceiling format is useful where a pendant would hang too low, including bedrooms, hallways and rooms with more restricted ceiling height.

• Living rooms needing a decorative fabric-shaded ceiling light
• Bedrooms where pendant drop needs to be kept to a minimum
• Dining rooms with classic or modern classic interiors
• Hallways and entrance areas with lower ceilings
• Neutral interiors using brass, beige or natural fabric tones
• Rooms where three separate light sources are preferred to one central bulb

• Three-light design distributes illumination from more than one point.
• Natural 100% linen shade adds visible texture and softens the appearance of the light.
• Matching cotton inner gives the shade a coordinated finish when viewed from below.
• Vintage brass-plated finish introduces a warm metallic detail without requiring a hanging pendant.
• 34 cm projection makes the fitting practical for rooms with limited ceiling height.
• Uses replaceable E14 LED bulbs, so the light source can be changed independently of the fitting.
• Supports up to 6W LED per bulb for a total of three lamps.
• Compatible with dimmable E14 bulbs and a suitable dimmer switch.
• IP20 rating makes it suitable for normal dry indoor areas.

• Provides the decorative appearance of a large fabric shade in a close-to-ceiling format.
• Three E14 lampholders offer broader light distribution than a single-lamp flush fitting.
• The natural linen and vintage brass combination works with a wide range of warm and neutral interior schemes.
• Replaceable LED bulbs give flexibility over colour temperature and brightness within the verified wattage limit.
• The 40 cm diameter gives the fitting enough visual presence for use as a main ceiling light.

Are the bulbs included?

No. The Highclere 122081 requires three E14 LED bulbs, which need to be purchased separately. The verified maximum is 6W LED per bulb.

Is this ceiling light dimmable?

Yes. It is compatible with dimmable E14 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

Is it suitable for low ceilings?

Yes. The fitting has a 34 cm projection and is designed as a flush ceiling light, making it more suitable for restricted ceiling heights than a pendant with a long suspension.

Can this light be used in a bathroom?

The fitting is rated IP20, so it is intended for normal dry indoor locations. It should not be selected for bathroom zones or other areas that require a higher level of protection from moisture.

What size is the Highclere 122081?

The fitting measures 40 cm in diameter with a 34 cm projection from the ceiling. The natural linen shade itself is 15 cm high.