The Endon Nantes 119137 is a rechargeable LED picture light designed to illuminate artwork, photographs and framed displays without requiring a mains wiring point. Its traditional picture-light profile is finished in warm brass and paired with a frosted polycarbonate diffuser for a softer, more even spread of light. A 2W integrated LED produces 140 lumens at a warm white 3000K colour temperature, while the touch-operated three-stage dimmer gives a choice of brightness levels. With an adjustable projection from 10 cm to 18.5 cm, the light can be positioned to direct illumination towards the display below. Rechargeable operation also makes it useful where adding new electrical wiring would be inconvenient.
The Nantes combines a slim cylindrical picture-light head with a warm brass finish for a classic decorative appearance. Its body is made from steel, while the integrated LED is covered by a frosted polycarbonate diffuser. This diffuser forms a clean, understated front to the light and helps soften the output rather than leaving the LED source directly exposed.
At 36 cm wide and 5 cm high, the fitting has proportions suited to displaying above framed artwork and photographs without visually dominating the piece. The adjustable arm allows its projection from the wall to be varied between 10 cm and 18.5 cm.
A built-in 2W LED provides 140 lumens of warm white 3000K light. The frosted polycarbonate diffuser helps spread the illumination across the area below the fitting, making the Nantes suitable for highlighting artwork and photographs.
Brightness is controlled by a touch-operated three-stage dimmer button, so the light level can be changed without installing a separate dimmer switch. The adjustable arm provides a projection range of 10 cm to 18.5 cm, helping direct the light towards the display being illuminated.
The fitting is rechargeable and uses a USB-C connection with a USB-C to USB-A charging cable. It therefore does not require a permanent mains wiring connection. Its IP20 rating means it is intended for dry indoor locations.
- Illuminating framed artwork and paintings
- Highlighting photographs and decorative wall displays
- Living rooms and dining rooms
- Bedrooms and hallways
- Traditional and modern classic interiors
- Walls where installing new mains wiring would be inconvenient
- Dry indoor spaces requiring a cordless picture light
- Rechargeable design avoids the need for a permanent mains connection.
- Integrated 2W LED means there is no separate bulb to purchase.
- 140-lumen output provides dedicated illumination for pictures and decorative displays.
- Warm white 3000K light suits living areas, bedrooms and hallways.
- Three-stage touch dimming provides a choice of brightness levels from the fitting itself.
- Adjustable 10 cm to 18.5 cm projection helps position the light relative to the artwork.
- Frosted polycarbonate diffuser softens the appearance of the integrated LED source.
- Warm brass finish gives the fitting a classic decorative character.
- USB-C charging provides a convenient way to recharge the built-in power supply.
- Provides picture lighting without requiring a mains electrical point behind the fitting.
- Combines rechargeable operation with an integrated LED light source.
- Built-in three-stage touch control removes the need for a separate wall dimmer.
- Adjustable projection gives useful flexibility when positioning the light over different frames.
- The 36 cm width provides a practical format for individual pictures, photographs and wall displays.
- Its warm brass finish works particularly well with classic and decorative interiors.
| Brand | Endon |
|---|---|
| Collection | Nantes |
| Product Code | 119137 |
| Product Type | Rechargeable LED picture light |
| Finish | Warm brass plate |
| Material | Steel and polycarbonate |
| Diffuser | Frosted polycarbonate |
| Integrated LED | Yes |
| Maximum Wattage | 2W integrated LED |
| Lumens | 140 lm |
| Colour Temperature | 3000K warm white |
| LED Lifetime | 30,000 hours |
| Dimmable | Yes, three-stage touch dimming |
| Switch Type | Touch three-stage dimmer button |
| Power Type | Rechargeable |
| Charging Connection | USB-C |
| Charging Cable | USB-C to USB-A |
| IP Rating | IP20 |
| Height | 5 cm |
| Width | 36 cm |
| Shade Height | 3.8 cm |
| Minimum Projection | 10 cm |
| Maximum Projection | 18.5 cm |
| Adjustable | Yes |
| Weight | 0.81 kg |
| Installation Type | Wall-mounted, rechargeable, no permanent mains wiring connection required |
Does the Endon Nantes need to be hardwired?
No. The Nantes is a rechargeable picture light and does not require a permanent mains electrical connection. It mounts to the wall and is recharged through its USB-C connection, making it useful where adding a new wired lighting point would be inconvenient.
Can the brightness be adjusted?
Yes. A touch-operated three-stage dimmer button is built into the fitting, providing three brightness levels. No separate wall dimmer switch is required for this function.
Does this picture light need a bulb?
No separate bulb is required. The Nantes has an integrated 2W LED producing 140 lumens at a warm white colour temperature of 3000K.
Can the position of the light be adjusted?
Yes. The arm is adjustable, providing a projection from 10 cm to 18.5 cm. This gives some flexibility when positioning the light relative to the frame or artwork below it.
Can the Nantes picture light be used in a bathroom or outdoors?
No. The fitting has an IP20 rating and is designed for dry indoor locations. It should not be treated as a bathroom or outdoor light where protection against moisture or water is required.
Product range name and SKU: Nantes - 119137
This product is supplied by Endon Lighting
| Product Info | |
| Brand | Endon |
| Product Code | 119137 |
| Range Name | Nantes |
| Dimensions | |
| Height (cm) | 5 cm |
| Width (cm) | 36 cm |
| Depth (cm) | 10 cm - 18.5 cm |
| Bulb | |
| Energy Efficiency Class | F |
| Bulb Included | Yes |
| Number of Lights | 1 |
| Lamp Holder Type | Integrated LED |
| Type of Included Bulb | LED (build-in) |
| Colour Temperature (Kelvin) | 3000 K |
| Lumens Output | 140 lm |
| Maximum Wattage (W) | LED 2W |
| Product Finish | |
| Shade / Diffuser Material | Acrylic / Plastic, Metal |
| Shade / Diffuser Colour | White, Brass |
| Frame / Base Material | Metal |
| Frame / Base Colour | Brass |
| Features | |
| IP Rating | IP20 |
| Switch Type | Touch Lamp |
| Extras | Adjustable Diffuser, Build In USB, Dimmable LED, Rechargeable |
How bright is a light bulb?
Because the Lumen output from different manufacturers will vary. Here's a quick and easy guide to approximate total Lumen output.
Lumens |
Watts |
| 2600 Lumens (lm) | 150W |
| 1600 Lumens (lm) | 100W |
| 1100 Lumens (lm) | 75W |
| 800 Lumens (lm) | 60W |
| 450 Lumens (lm) | 40W |
Understanding LED colour temperature and the Kelvin scale
Colour temperature 2000K to 3000K, the light produced is often referred to as a "warm white", "soft white", occasionally called a "candle white". It ranges from orange-ish to yellow-ish white in appearance. This kind of light is attractive, enjoyable, comfortable and relaxing.
Colour temperature 3100K to 4500K, the light produced is often referred to as a "neutral white", "bright white" or "natural white". Light sources within this range will emit a more neutral white light and may even have a slightly blue tint. This kind of light is bright, vibrant and clean appearing.

Colour temperature 4600K and above, the light produced is often referred to as a "cool white", "pure white" or "day white". Light sources in this range will have a blue-ish white tint to them. The higher the number, the more blueish it will appear. This kind of light will appear crisp, invigorating and energetic.
Please refer to full guide described in the main LED bulbs description