Bevin - Polished Chrome Wall Lamp with Clear Ribbed Glass IP44

Bevin features a clear cylindrical glass shade with closely spaced vertical ribs that create a distinctive fluted appearance. The textured glass catches and refracts light, adding visual interest without completely concealing the bulb.

A polished chrome finish complements the transparent glass and gives the fitting a bright, reflective appearance. The narrow rectangular metal backplate supports a short projecting arm and an upright glass cylinder, creating a balanced geometric design.

Its combination of chrome, clear glass and clean lines works particularly well with contemporary bathroom fittings, chrome taps, mirrors and interiors featuring subtle Art Deco or mid-century details.

The Bevin wall light uses one replaceable E14 (SES) candle-shaped bulb, which must be purchased separately. The manufacturer specifies a maximum lamp wattage of 10W and recommends an E14 LED candle bulb.

The upright ribbed glass cylinder allows light to pass through its sides while the vertical fluting refracts and softens the appearance of the illuminated bulb. The resulting decorative lighting can complement a main bathroom ceiling light or provide additional illumination beside a mirror.

Compatible with dimmable E14 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

Bevin has an IP44 rating and is suitable for bathroom zones 1 and 2. The installation instructions specify vertical wall mounting only, with the glass positioned at the top. Its Class I construction requires an earthed electrical connection.

• Bathroom mirrors - positioned beside a mirror for additional decorative lighting.
• Vanity areas - installed as a matching pair on either side of a suitable mirror.
• En suites - a slim wall light for spaces where a decorative fitting is preferred.
• Cloakrooms - adding texture and reflected light without a wide wall fitting.
• Contemporary bathrooms - complementing chrome taps, fittings and accessories.
• Mid-century and Art Deco-inspired interiors - pairing vertical fluted glass with simple geometric detailing.
• Bedrooms and hallways - providing decorative accent lighting in suitable indoor locations.

• IP44 protection - suitable for bathroom zones 1 and 2 when correctly installed.
• Polished chrome finish - provides a reflective surface that coordinates with common bathroom fixtures.
• Clear ribbed glass - adds vertical texture and refracts light passing through the shade.
• Slim proportions - measures 30 cm high and 8 cm wide, making it suitable for mirror-side arrangements.
• Single E14 lampholder - accepts a replaceable candle-shaped bulb rather than relying on an integrated LED module.
• LED compatible - suitable for an appropriately specified E14 LED candle bulb.
• Dimming compatibility - brightness can be adjusted using a suitable dimmable bulb and compatible dimmer switch.
• Class I earthed construction - designed for connection to a suitable earthed lighting circuit.
• Vertical wall installation - designed to be mounted upright with the glass cylinder at the top.
• Matching pair potential - two fittings can be positioned symmetrically around a bathroom mirror where space permits.

• Combines bathroom suitability with decorative styling, so the same fitting can contribute to both practical and accent lighting.
• The clear fluted glass provides a more textured appearance than a conventional plain-glass wall light.
• Its narrow width makes it useful for layouts where wall space beside a mirror is limited.
• The polished chrome finish pairs naturally with chrome bathroom accessories and reflective surfaces.
• A replaceable E14 bulb allows the light colour and brightness to be selected to suit the intended setting.
• The simple upright design can also be used in bedrooms, hallways and other suitable indoor spaces.

Is the Bevin wall light suitable for bathrooms?

Yes. Bevin has an IP44 rating, providing protection against splashing water. The manufacturer confirms suitability for bathroom zones 1 and 2. Installation must comply with the applicable electrical regulations, and a qualified electrician should assess the proposed position and electrical connection.

What bulb does the Bevin bathroom wall light require?

The fitting uses one E14 (SES) candle-shaped bulb, which is not included. The manufacturer specifies a 10W maximum lamp rating and recommends its BUL-E14-LED-17 LED candle bulb. Choose a correctly sized and appropriately rated bulb for the fitting.

Can the Bevin wall light be dimmed?

Yes. It is compatible with dimmable E14 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

Can the Bevin wall light be installed horizontally?

No. The manufacturer's installation instructions specify vertical mounting only, with the ribbed glass cylinder positioned at the top. The fitting should not be installed horizontally or upside down, as these orientations are not approved in the installation instructions.

Can I use two Bevin lights on either side of a bathroom mirror?

Yes. With a height of 30 cm and width of 8 cm, Bevin is well suited to symmetrical mirror-side arrangements where sufficient wall space is available. Using a matching pair provides light from two positions, while the ribbed glass adds a consistent decorative detail to the bathroom.