Bevin - Natural Brass Wall Lamp with Amber Ribbed Glass IP44

Bevin features a tall, cylindrical amber-tinted glass shade with fine vertical ribbing. The textured glass adds visual detail and gently softens the appearance of the illuminated bulb, while retaining the warm amber colouring that gives the fitting its distinctive look.

A natural brass finish complements the glass and extends across the slim rectangular backplate, short projecting arm and lampholder detail. The combination of straight lines, a simple cylinder and warm metallic colouring creates a contemporary design with classic influences.

Constructed from metal and glass, the fitting measures 30 cm high, 8 cm wide and 12 cm deep. Its narrow proportions make it particularly attractive when positioned beside a bathroom mirror.

The Bevin Bathroom Wall Light uses one replaceable E14 (SES) candle-shaped bulb, purchased separately. The manufacturer specifies a maximum lamp wattage of 10W and recommends an E14 LED bulb.

The candle-shaped bulb requirement is particularly useful when choosing a replacement, as the light source sits inside the narrow cylindrical glass shade. Select an appropriately sized E14 candle bulb rather than assuming that every E14 bulb shape will fit.

The amber ribbed glass allows light to pass through its textured surface, producing a warmer visual effect than clear glass. Actual brightness depends on the bulb selected, making Bevin particularly suitable for decorative lighting beside mirrors or as part of a layered bathroom lighting arrangement.

Compatible with dimmable E14 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

Its IP44 rating provides protection against splashing water. The manufacturer confirms suitability for bathroom zones 1 and 2, subject to applicable electrical installation regulations.

The fitting must be mounted vertically with the glass at the top. It is a Class I earthed fitting requiring a fixed mains electrical connection.

• Bathroom mirrors and vanity areas where decorative wall lighting is desired.
• Matching installations on either side of a bathroom mirror.
• En suites and cloakrooms with limited wall width.
• Bathroom zones 1 and 2 where an IP44-rated fitting is appropriate.
• Interiors featuring natural brass taps, handles or other warm metallic finishes.
• Modern classic and mid-century-inspired bathrooms.
• Bedrooms, hallways and living spaces requiring a decorative wall light with warm amber glass.

• Natural brass finish: Coordinates with warm-toned bathroom fittings and decorative accessories.
• Amber ribbed glass: Adds texture and colour while softening the appearance of light passing through the shade.
• IP44 protection: Suitable for bathroom zones 1 and 2 when installed in accordance with applicable regulations.
• Slim 8 cm width: Helps the fitting sit comfortably beside mirrors or in narrower wall spaces.
• Replaceable E14 candle bulb: Allows the light source to be replaced without changing the complete fitting.
• LED compatibility: Supports an E14 LED candle bulb for efficient everyday illumination.
• Dimming compatibility: Brightness can be adjusted using a compatible dimmable bulb and suitable dimmer switch.
• Metal and glass construction: Combines a defined rectangular backplate with a decorative cylindrical glass shade.
• Class I electrical construction: Designed for connection to an earthed electrical supply.

• Combines decorative amber glass and a natural brass finish in a bathroom-rated wall light.
• Offers a narrow, vertically proportioned design that works well beside mirrors without requiring excessive wall width.
• Provides flexibility in choosing an E14 LED bulb to suit the preferred brightness and colour temperature.
• Can be installed individually or in matching pairs for a balanced vanity lighting arrangement.
• Suitable for selected bathroom zones as well as dry interior spaces, providing flexibility across different rooms.
• Includes a clearly defined vertical mounting arrangement and an earthed construction for permanent wall installation.

Can the Bevin wall light be installed beside a bathroom mirror?

Yes. Its slim 8 cm width and 30 cm height make it suitable for positions beside bathroom mirrors and vanity units. The IP44 rating allows installation in bathroom zones 1 and 2, subject to the relevant electrical installation requirements. A matching pair can create a balanced decorative arrangement.

What bulb does the Bevin bathroom wall light require?

It requires one E14 (SES) candle-shaped bulb, which is not included. The manufacturer specifies a maximum lamp wattage of 10W and recommends its BUL-E14-LED-17 LED bulb. Choosing a suitable candle-shaped bulb is important because the light source sits within the narrow glass shade.

Is the Bevin bathroom wall light dimmable?

Yes, it is compatible with dimmable E14 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly. Dimming gives you flexibility when using the fitting for decorative or general bathroom lighting.

Can this wall light be installed horizontally or upside down?

No. The manufacturer's installation instructions specify vertical mounting only, with the cylindrical glass shade positioned at the top. The fitting should not be installed horizontally or inverted. This mounting orientation must be followed, particularly when installing the light in a bathroom.

Can the Bevin wall light be used outside the bathroom?

Yes. Although designed for bathroom use, Bevin can also be installed in bedrooms, hallways, cloakrooms and living spaces. Its natural brass finish and amber ribbed glass make it suitable for interiors where warm decorative wall lighting is desired. The fitting is designed for indoor use.