Lucille - Antique Brass 3 Light Semi Flush with Clear Glass Rods

The Lucille combines a warm antique brass finish with clear glass for a decorative appearance that works well with both classic and modern classic interiors. Its rounded, softly curved form gives the fitting more visual presence than a simple flat flush light, while the clear glass keeps the design open and bright. Steel and glass construction is confirmed for this model. At 33 cm in diameter, it is substantial enough to form a decorative ceiling feature without the long drop associated with a pendant or chandelier.

This flush ceiling light uses one replaceable E27 LED bulb with a verified maximum of 10W LED. The bulb is not included, so it will need to be purchased separately. Because the clear glass surrounds the light source without an opaque shade, light can pass through the fitting in several directions while the bulb remains visible as part of the overall appearance.

Compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

The fitting is Class I and requires an earthed connection. It is a mains-wired ceiling fitting intended for fixed installation rather than plug-in use.

• Bedrooms where a decorative fitting is wanted without a long suspension
• Hallways and entrance areas with limited ceiling height
• Living rooms with classic or modern classic interiors
• Dining rooms where a flush fitting is more practical than a pendant
• Lower ceilings where a 31.5 cm projection is suitable
• Interior spaces requiring a decorative antique brass and clear glass finish

• Flush ceiling design reduces the drop compared with a suspended pendant
• Antique brass finish introduces a warm decorative detail
• Clear glass allows the bulb and internal light source to remain visible
• Single E27 lampholder accepts replaceable LED bulbs
• Maximum 10W LED lamp rating provides a clear bulb specification when choosing a replacement
• Dimming compatibility provides adjustable light levels when used with suitable equipment
• 33 cm diameter gives the fitting decorative presence without requiring a wide ceiling area
• Class I construction provides an earthed mains connection
• IP20 rating identifies it as an indoor fitting for dry interior locations

• A practical alternative to a hanging pendant where ceiling height is restricted
• Combines clear glass with an antique brass finish for a decorative but visually open design
• Uses a replaceable E27 LED bulb rather than a permanently integrated light source
• Offers dimming compatibility when fitted with the appropriate dimmable bulb and dimmer switch
• Compact 33 cm diameter suits a range of bedrooms, hallways and living spaces

What bulb does the Endon Lucille 120065 use?

It uses one E27 LED bulb with a verified maximum rating of 10W LED per bulb. The bulb is replaceable, so you can choose an appropriate colour temperature and light output for the room.

Is the bulb included?

No. The E27 LED bulb must be purchased separately. Check that the bulb does not exceed the verified 10W LED maximum for this fitting.

Can the Lucille flush ceiling light be dimmed?

Yes. It is compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

Is this light suitable for a low ceiling?

The Lucille is a flush ceiling fitting with a projection of 31.5 cm, so it avoids the longer suspension of a pendant. Check your available ceiling height and required headroom before installation.

Can this fitting be used in a bathroom?

The fitting is rated IP20, so it is intended for dry indoor locations rather than areas requiring a higher level of moisture protection. Bathroom suitability depends on the required electrical zone and applicable installation regulations.