Serene - Brushed Aged Brass 3 Light Pendant with Vintage White Cotton

The Serene pendant combines a steel frame in a brushed aged brass plated finish with a vintage white cotton fabric shade. The fluted shade has a softly sculpted profile that gives the 50 cm wide fitting a decorative presence without relying on exposed lamps. A matching vintage white fabric diffuser is positioned beneath the shade, creating a neater view from below and helping to soften the appearance of the three light sources. Grey braided flex complements the warm brass finish and fabric detailing, while the overall design suits both classic interiors and rooms furnished with more contemporary pieces.

Three E14 lamp holders spread the light across the width of the shade rather than relying on a single central bulb. The fitting is designed for 3 x 6W LED E14 bulbs, which are purchased separately. The fabric shade and lower diffuser help create a softer, more evenly screened light, making the pendant particularly suitable for general decorative lighting in living and dining areas.

The suspension height can be adjusted during installation from a minimum drop of 45 cm to a maximum of 178 cm. This gives useful flexibility when positioning the light over a dining table or adapting it to different ceiling heights. The pendant is compatible with dimmable E14 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

• Dining rooms and positioning above dining tables.
• Living rooms requiring a decorative central ceiling light.
• Bedrooms with classic or modern classic interiors.
• Larger hallways and entrance areas.
• Rooms with standard or taller ceilings thanks to the adjustable drop.
• Interiors using warm brass finishes, soft neutrals and fabric textures.
• Indoor dry areas where an IP20 fitting is appropriate.

• Three E14 light sources distribute illumination across the 50 cm diameter shade.
• Brushed aged brass plated finish provides a warm decorative contrast to the pale fabric.
• Vintage white cotton fabric shade gives the pendant a soft, classic appearance.
• Matching fabric diffuser screens the bulbs from direct view beneath the fitting.
• Adjustable 45 cm to 178 cm drop allows the installation height to be tailored to the room.
• Compatible with replaceable E14 LED bulbs up to the verified 6W LED rating per bulb.
• Dimming compatibility allows adjustable light levels when suitable dimmable bulbs and a compatible dimmer are used.
• Grey braided flex adds a considered decorative detail to the suspension.

• The wide fluted fabric shade creates a substantial decorative focal point without exposed bulbs.
• Adjustable suspension offers flexibility for dining areas and different ceiling heights.
• Three replaceable lamps make future bulb replacement straightforward.
• The fabric diffuser provides a more finished appearance when the pendant is viewed from below.
• Its combination of aged brass and vintage white fabric works across a broad range of classic and elegant interiors.

Are the bulbs included with the Endon Serene 118592?

No. The pendant requires three E14 LED bulbs, which must be purchased separately. The verified rating is up to 6W LED per bulb.

Can the height of this pendant be adjusted?

Yes. The suspension can be adjusted during installation from a minimum drop of 45 cm to a maximum of 178 cm, making it suitable for a range of ceiling heights and furniture layouts.

Is the Endon Serene pendant dimmable?

Yes. It is compatible with dimmable E14 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

Is this pendant suitable for a bathroom?

The fitting is rated IP20, so it is intended for indoor dry areas. It should not be treated as a bathroom-rated light unless its installation location complies with the applicable electrical regulations.

How large is the Serene pendant?

The shade measures 50 cm in diameter. Its adjustable drop ranges from 45 cm to 178 cm, so both the width and suspension height should be checked against the intended position before installation.