Rudy - White 4 Light Spotlights

The Rudy PL4 has a simple architectural appearance with a long rectangular mounting base and four cylindrical spotlight heads. Its die-cast aluminium construction is finished in white using a powder-coated surface, creating a clean, understated look that integrates easily with pale ceilings and contemporary interiors.

Each spotlight can be repositioned independently, so the appearance of the fitting can also be adjusted according to where the heads are aimed. The restrained design keeps attention on the light itself rather than decorative detailing.

Four GU10 light sources provide separate points of direct illumination across the 76 cm long fitting. Each spotlight can be tilted through approximately 90 degrees and rotated through approximately 355 degrees, making it possible to direct light towards work surfaces, seating areas, artwork, shelving or circulation spaces.

The fitting is supplied with four replaceable 7W GU10 LED bulbs. Each included lamp produces 540 lumens at a warm white 3000K colour temperature. Because the lamps are replaceable, they can be changed individually when required rather than replacing the complete fitting.

The manufacturer's technical information specifies the Rudy PL4 as non-dimmable. It operates directly from a 220-240V AC mains supply and does not require a separate power supply.

• Modern kitchens requiring directional ceiling lighting
• Living rooms with several areas to illuminate
• Hallways and circulation areas
• Home offices and workspaces
• Highlighting pictures, shelving or architectural features
• Bedrooms where adjustable task or accent lighting is useful
• Indoor wall or ceiling installations

• Four independently adjustable spotlights provide greater control over where the light is directed.
• Approximately 355-degree rotation and 90-degree tilt provide flexible aiming.
• Supplied with four replaceable 7W GU10 LED bulbs.
• Included 3000K lamps produce a warm white light suitable for many domestic interiors.
• Replaceable GU10 light sources avoid dependence on a permanently integrated LED module.
• Die-cast aluminium construction keeps the design slim and visually simple.
• White powder-coated finish coordinates easily with light-coloured ceilings and walls.
• Can be installed as either a ceiling light or wall-mounted directional fitting.
• Class II construction means the fitting uses double or reinforced insulation.

• Useful where one electrical point needs to illuminate several different areas.
• Four adjustable heads provide more positioning flexibility than a fixed ceiling light.
• The 76 cm linear format provides good coverage along longer surfaces or room zones.
• Replaceable GU10 bulbs make future lamp replacement straightforward.
• Supplied LED bulbs remove the need to purchase the initial set separately.
• Suitable for both wall and ceiling mounting where directional indoor lighting is required.

Are the bulbs included with the Rudy PL4?

Yes. The fitting is supplied with four replaceable 7W GU10 LED bulbs. Each included bulb produces 540 lumens and has a warm white 3000K colour temperature.

Can the individual spotlights be adjusted?

Yes. Each spotlight head can be positioned independently, with approximately 90 degrees of vertical adjustment and 355 degrees of horizontal rotation. This makes it useful for directing light towards different parts of the room.

Is the Ideal Lux Rudy PL4 dimmable?

No. The manufacturer's technical specification lists this version of the Rudy PL4 as non-dimmable.

Can this fitting be mounted on a wall?

Yes. Ideal Lux specifies the Rudy PL4 for both ceiling and wall installation. Its adjustable heads can therefore be used to direct light from either mounting position.

Is the Rudy PL4 suitable for a bathroom or outdoor use?

No. The fitting has an IP20 rating and is intended for indoor use. It does not provide the water protection normally required for bathroom zones or outdoor locations.