Jupiter - Matt Grey Pendant Ø 25 cm

The Jupiter has a rounded metal shade with a 25 cm diameter and a matt grey exterior. Inside, the shade combines grey and cream tones, creating a lighter contrast beneath the fitting while retaining the restrained appearance of the outer finish. Its uncomplicated silhouette works well with contemporary and modern interiors, particularly where a compact pendant is preferred over a larger decorative fitting. The metal shade conceals the bulb from many side viewing angles and leaves the underside open, reinforcing the downward lighting effect.

This pendant uses one E27 bulb with a verified maximum of 10W LED. The bulb is not included, so you can choose the brightness and colour temperature that best suits the room. Its open-bottom metal shade directs most of the useful light downwards, making the fitting well suited to illuminating a table, work surface or circulation area directly beneath it.

LED bulbs are compatible. The fitting is also compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

The fitting is mains-operated and has an IP20 rating, so it is intended for dry indoor locations rather than bathrooms, outdoor areas or other places where protection from moisture is required.

• Dining tables where concentrated downward light is useful
• Kitchen islands and breakfast bars
• Hallways and entrance areas with suitable ceiling height
• Smaller rooms where a compact 25 cm pendant is preferable
• Contemporary interiors with grey or neutral colour schemes
• Installing several matching pendants where separate points of light are required

• Compact 25 cm diameter keeps the pendant visually neat in smaller spaces.
• Matt grey finish provides a neutral look that coordinates easily with modern interiors.
• Grey and cream inner adds visible contrast beneath the metal shade.
• Open-bottom shade directs useful light towards the area immediately below.
• Replaceable E27 bulb lets you select a suitable LED brightness and colour temperature.
• Verified maximum of 10W LED supports efficient modern lamp options.
• Compatible with dimmable E27 bulbs and a suitable dimmer switch.
• Maximum overall height of 150 cm provides a generous pendant drop for suitable ceilings.

• Useful for creating focused downward illumination rather than relying solely on general room lighting.
• The 25 cm shade is easy to incorporate where a larger pendant would dominate the space.
• A replaceable E27 light source offers more flexibility than a permanently integrated LED module.
• The grey finish and simple form suit a broad range of contemporary neutral interiors.
• Suitable as a single pendant or for repeated installations over longer tables and counters.

What bulb does the Searchlight Jupiter 26225G use?

It uses one E27 bulb with a verified maximum of 10W LED per bulb. The bulb is replaceable, allowing you to select an appropriate brightness and colour temperature for the room.

Is the bulb included?

No. The E27 bulb must be purchased separately. This gives you the flexibility to choose a suitable LED bulb according to the lighting level and colour temperature you prefer.

Can this pendant be dimmed?

Yes. It is compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

How large is the Jupiter 26225G pendant?

The metal shade measures 25 cm in diameter, and the fitting has a maximum overall height of 150 cm. Its relatively compact shade makes it suitable for areas where a wide pendant would take up too much visual space.

Can this pendant be used in a bathroom or outdoors?

No. The Jupiter 26225G is rated IP20 and is intended for dry indoor locations. It should not be used outdoors or in bathroom locations that require a higher level of protection against moisture.