Dallas 1 - Vintage Black & Gold Pendant Ø 30 cm

Dallas 1 uses a metal shade finished in matt black on the outside with a painted gold interior. The contrasting inner surface becomes especially noticeable when the pendant is illuminated, adding warmth to the appearance of the fitting without changing its simple, compact shape.

A matching black ceiling plate and suspension keep the overall look coordinated. At 30 cm in diameter, the pendant is substantial enough to work as a focal light over a smaller table or counter while remaining easy to combine with other furnishings.

The pendant uses one replaceable E27 bulb with a verified maximum of 10W LED. The bulb is not supplied, so the colour temperature and brightness can be selected to suit the room and intended use.

The metal shade concentrates the light mainly downwards, making the Dallas 1 useful where light is wanted over a defined surface such as a dining table, breakfast bar or kitchen island. Its suspension can be adjusted during installation between approximately 48 cm and 158 cm to position the shade at a suitable level.

As a mains-wired ceiling fitting with a replaceable E27 bulb, it is compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

• Dining tables and smaller dining areas
• Kitchen islands and breakfast bars
• Living rooms requiring focused pendant lighting
• Bedrooms with black or warm metallic accents
• Hallways with sufficient ceiling height for a pendant
• Retro, industrial and modern interiors
• Dry indoor areas where an IP20 fitting is suitable

• Single light pendant with a compact 30 cm diameter shade.
• Matt black exterior and painted gold interior create a distinctive two-tone appearance.
• Metal shade directs useful light towards the surface below.
• Adjustable suspension from approximately 48 cm to 158 cm provides installation flexibility.
• Replaceable E27 bulb makes future lamp changes straightforward.
• Compatible with LED bulbs up to the verified 10W LED maximum.
• Dimming is possible with a suitable dimmable E27 bulb and compatible dimmer switch.
• Class 2 double-insulated construction does not require an earth connection to the fitting.

• The black and gold finish offers a strong decorative contrast without an oversized shade.
• Adjustable drop makes it easier to position the pendant above tables, islands and counters.
• A standard E27 lampholder provides a wide choice of compatible LED bulbs.
• The downward-focused metal shade is practical for lighting a defined area beneath the fitting.
• Its 30 cm diameter works well individually or as part of a repeated pendant arrangement where space permits.

What bulb does the Prism Dallas 1 use?

It uses one E27 bulb with a verified maximum of 10W LED. The bulb is replaceable, so you can select the brightness and colour temperature that best suit the room. The bulb is not included with the pendant.

Is the Dallas 1 pendant height adjustable?

Yes. The suspension can be adjusted during installation from approximately 48 cm to 158 cm overall. This provides useful flexibility when positioning the shade above a dining table, kitchen island or other surface.

Can this pendant be dimmed?

Yes. It is compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

Is the Prism Dallas 1 suitable for a bathroom?

The fitting is rated IP20, so it is intended for dry indoor locations rather than areas requiring increased protection from moisture. Bathroom suitability depends on the installation zone and applicable electrical regulations.

Where does the Dallas 1 work particularly well?

Its 30 cm metal shade and adjustable drop make it particularly useful above dining tables, kitchen islands and breakfast bars. It can also provide a decorative pendant light in living rooms, bedrooms and suitable hallways.