Monaco 3BK - Matt Black Pendant with Clear Glass Rods

The Monaco 3BK combines a matt black ceiling plate and frame with vertically arranged clear glass rods. Its narrow cylindrical form measures approximately 21 cm across, creating a decorative focal point without taking up a large amount of ceiling space. The contrast between the dark frame and transparent glass gives the pendant a crisp, contemporary character that can also complement more decorative interiors.

This is a handmade fitting. Small tooling marks and slight variation in pattern or finish are natural results of the manufacturing process, not faults.

A single E27 lampholder sits within the glass-rod surround. The bulb is not supplied, so the light source can be selected separately to suit the required brightness and colour temperature. The fitting is LED compatible and has a verified maximum of 10W LED for its single bulb.

Clear glass rods leave the light source visible and allow light to pass through and between the individual pieces rather than enclosing it behind an opaque shade. The suspension height is adjustable during installation from approximately 48 cm to 147 cm, providing useful flexibility for different ceiling heights and furniture layouts.

Compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

• Bedside lighting where a hanging pendant can replace a table lamp
• Dining areas requiring a compact decorative pendant
• Hallways and entrance areas with sufficient ceiling height
• Living rooms as a decorative single pendant
• Contemporary interiors using black fittings and clear glass
• Rooms where an adjustable drop is useful during installation

• Single-light pendant with a compact 21 cm diameter
• Matt black finish creates a strong contrast with the transparent glass
• Clear decorative glass rods allow light to remain visible around the fitting
• Adjustable installation height from approximately 48 cm to 147 cm
• E27 lampholder provides a wide choice of compatible LED bulbs
• Maximum 10W LED bulb rating is clearly specified for bulb selection
• Dimmable bulb compatibility provides optional brightness control with a suitable dimmer
• IP20 rating makes the fitting suitable for normal dry indoor areas

• Compact proportions suit spaces where a wider chandelier would be impractical
• The clear glass rod design adds decorative detail while keeping the fitting visually open
• Height adjustment helps position the pendant appropriately for the room and ceiling height
• A replaceable E27 bulb gives flexibility over brightness and colour temperature
• Matching Monaco fittings are available for coordinating lighting across an interior

Is the bulb included with the Monaco 3BK?

No. The pendant requires one E27 bulb, which must be purchased separately. Its verified maximum rating is 10W LED per bulb, so you can choose an appropriate LED colour temperature and brightness for the room.

Can the Monaco 3BK be dimmed?

Yes. It is compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

Can the hanging height be adjusted?

Yes. The suspension can be adjusted during installation from approximately 48 cm to 147 cm. This gives the installer flexibility to position the pendant to suit the ceiling height and intended location.

Is this pendant suitable for a bathroom or outdoor area?

No. The Monaco 3BK has an IP20 rating and is intended for normal dry indoor locations. It should not be selected for outdoor use or bathroom zones that require a higher level of moisture protection.

How wide is the Monaco 3BK pendant?

The fitting measures approximately 21 cm in diameter. Its relatively narrow proportions make it particularly useful where decorative glass detail is wanted without the footprint of a large multi-light pendant.