Metro - Marine Grade Stainless Steel 2 Light PIR Wall Lamp

The Metro has a simple cylindrical body mounted vertically against a rectangular wall plate, with one lamp directed upwards and the other downwards. Its marine-grade 316L stainless steel construction is finished in satin silver, giving the fitting a clean contemporary appearance while making the material particularly suitable for exposed and coastal environments.

Clear glass diffusers cover the two GU10 lamp positions without concealing the light source. The PIR sensor is positioned beneath the main body and forms part of the fitting rather than requiring a separate external sensor.

Two GU10 lampholders provide separate upward and downward light, helping illuminate the wall above the fitting as well as the entrance, pathway or surface below. The bulbs are replaceable and are not supplied, so suitable GU10 LED lamps can be chosen according to the preferred brightness and colour temperature.

The fitting is specified for GU10 LED bulbs up to 5W each. Its integral PIR motion sensor provides automatic activation when movement is detected, which is useful around doorways and access routes where hands-free lighting is convenient.

The Metro is IP54 rated for outdoor use. Because operation incorporates an integral PIR sensor, compatibility with an external dimmer is not confirmed, and the fitting should not be described as dimmable.

• Front doors and entrance areas
• Coastal properties requiring marine-grade stainless steel
• Pathways and side passages
• Patios and sheltered outdoor seating areas
• Exterior walls where up and down lighting is preferred
• Locations where automatic PIR-activated lighting is useful
• Modern and contemporary exterior schemes

• Marine-grade 316L stainless steel construction is suitable for demanding outdoor and coastal locations.
• Two GU10 light sources direct illumination both upwards and downwards.
• Integral PIR sensor automatically activates the light when movement is detected.
• Replaceable GU10 bulbs allow the light output and colour temperature to be selected separately.
• Compatible with GU10 LED bulbs up to 5W each.
• Clear glass diffusers protect the lamp positions while allowing light to pass through.
• IP54 rating makes the fitting suitable for exterior wall installation.
• Compact proportions of approximately 21 cm high and 7 cm wide suit areas where wall space is limited.

• Combines two-directional exterior lighting with automatic PIR operation in one fitting.
• 316L marine-grade stainless steel makes it a practical option for properties near the coast.
• Replaceable bulbs provide more flexibility than a permanently integrated light source.
• The narrow cylindrical design works well beside doors and along passages without appearing bulky.
• Up and down light can highlight the exterior wall while also providing useful illumination below.

Is the Searchlight 7008-2-316L suitable for coastal locations?

Yes. The fitting is made from marine-grade 316L stainless steel, a material specifically suited to demanding exterior environments including coastal locations. It is also IP54 rated for outdoor use.

Are the GU10 bulbs included?

No. Two GU10 bulbs are required and must be purchased separately. The verified specification is for GU10 LED bulbs up to 5W each, so you can select a suitable brightness and colour temperature for the installation.

How does the PIR sensor work?

The wall light has an integral PIR motion sensor that activates the lamps when movement is detected. This provides automatic illumination around entrances, pathways and other access areas without requiring the light to be manually switched on each time.

Does this outdoor wall light shine both up and down?

Yes. It has two separate GU10 lamp positions. One directs light upwards, and the other directs light downwards, providing illumination on both sides of the cylindrical fitting and helping to highlight the exterior wall.

Is this light dimmable?

Dimming compatibility is not confirmed for this model. The fitting incorporates its own PIR motion sensor control, so it should not be assumed to be suitable for use with an external wall dimmer.