Bullseye - Antique Brass Flush with Clear Dimple Glass IP44

The Bullseye features a rounded, low-profile design with an antique brass plated finish and a clear dimpled glass shade. The decorative glass surface introduces texture without completely obscuring the light sources inside.

Constructed from iron and glass, the fitting combines a metal ceiling housing with a glass shade and coordinating decorative trim. Its circular shape creates a balanced appearance when viewed from below, while the warm brass colouring complements neutral interiors, traditional bathroom fittings and classic decorative details.

Unlike a plain glass ceiling light, the dimpled surface gives the Bullseye a more distinctive appearance, even when switched off.

The Bullseye uses two replaceable E27 bulbs positioned inside the glass shade. Having two light sources helps distribute illumination across the fitting rather than relying on a single central bulb.

The manufacturer specifies E27 candle LED bulbs for this model. Two bulbs are required and must be purchased separately. Choosing the appropriate colour temperature and brightness allows the lighting to be suited to the room's intended use.

The clear dimpled glass allows light to pass through while introducing subtle variation in its appearance. Unlike an opaque shade, the clear glass does not fully conceal the bulbs.

As a mains-wired ceiling fitting with replaceable E27 bulbs, it is compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

Its IP44 protection makes it suitable for appropriate bathroom locations, subject to the relevant installation requirements. The flush-mounted construction is particularly practical where ceiling height is limited.

• Bathrooms requiring an IP44 rated ceiling light in a classic decorative style.
• Cloakrooms and guest toilets where a compact ceiling fitting is preferred.
• Rooms with lower ceilings where pendant lighting would be impractical.
• Hallways and entrance areas needing a close-to-ceiling light.
• Bedrooms with traditional or modern classic interiors.
• Interiors featuring antique brass accessories, warm metallic details or patterned glass.
• Indoor spaces where replaceable LED bulbs are preferred over a fixed integrated LED light source.

• Two-light design: Separate E27 lampholders provide two light sources within one ceiling fitting.
• Antique brass finish: Adds warm metallic detailing that suits classic and decorative interiors.
• Clear dimpled glass: Introduces visual texture while allowing light to pass through the shade.
• IP44 protection: Provides resistance to splashing water for suitable bathroom installations.
• Flush ceiling mounting: Keeps the fitting close to the ceiling without a suspended cable or chain.
• Replaceable E27 bulbs: Allows compatible LED bulbs to be replaced individually when needed.
• LED compatibility: Suitable for the manufacturer's specified E27 candle LED bulbs.
• Compact proportions: The 35 cm width and 15 cm height make the fitting practical for rooms with limited overhead clearance.
• Class II construction: Double-insulated electrical design confirmed by the manufacturer.

• Combines decorative antique brass detailing with the practical benefits of a flush ceiling light.
• Offers an IP44-rated alternative to ordinary decorative ceiling fittings for suitable bathroom locations.
• The patterned clear glass adds character without using an opaque cover that completely hides the bulbs.
• Replaceable light sources provide flexibility when selecting LED brightness and colour temperature.
• Works across several indoor applications, making it easier to maintain a consistent decorative style between bathrooms, hallways and adjoining rooms.
• Its compact design provides a decorative ceiling-light option without the drop of a pendant or chandelier.

Is the Searchlight Bullseye suitable for bathrooms?

Yes. The Bullseye has an IP44 rating, providing protection against splashing water. It is suitable for appropriate bathroom locations, including many general bathroom ceiling applications. The exact installation position must comply with the applicable bathroom electrical safety requirements.

What bulbs does the Bullseye 66140-35AB use?

The fitting requires two E27 bulbs, with E27 candle LED bulbs specified by the manufacturer. Bulbs are not included. A recommended LED wattage of up to 8W per bulb is provided for this model.

Can this ceiling light be dimmed?

The fitting is compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly. Standard non-dimmable LED bulbs should not be used for dimming.

Is this light suitable for a low ceiling?

Yes. The Bullseye is a flush ceiling fitting measuring 15 cm high and 35 cm across. Its close-to-ceiling design avoids the hanging drop associated with pendant lights, making it a practical option for bathrooms, cloakrooms, hallways and other rooms with limited ceiling height.

Does the Bullseye have integrated LED lighting?

No. The Bullseye uses two replaceable E27 bulbs rather than a permanently integrated LED module. This means the bulbs can be changed individually, and compatible LED bulbs can be selected to provide a suitable brightness and colour temperature for the room.