Imperial - Satin Brass 2 Light Wall Lamp with Ribbed Glass IP44

The Imperial combines a satin brass-finished metal body with two clear ribbed glass shades positioned on either side of a circular central mounting point. The elongated glass cylinders give the fitting a neat, symmetrical appearance, while the ribbed surface adds visible texture and helps soften the appearance of the bulbs inside. Its simple geometric form suits modern and decorative interiors without appearing overly ornate. The fitting measures 37 cm in height, 10 cm in width and projects 14 cm from the wall, with the orientation determining whether the 37 cm dimension runs horizontally or vertically.

Two replaceable G9 LED bulbs are positioned at opposite ends of the fitting, providing light through the clear ribbed glass shades. Bulbs are not included, so the colour temperature and brightness can be selected to suit the room. Each lamp holder accepts a G9 LED bulb up to 7W.

The fitting can be mounted horizontally or vertically, providing useful flexibility around bathroom mirrors, vanity areas and other wall features. Its IP44 rating is confirmed as suitable for bathroom Zone 2 when installed in accordance with applicable wiring regulations.

Compatible with dimmable G9 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched for dimming to work properly.

• Bathroom Zone 2 wall lighting
• Above or beside bathroom mirrors
• Vanity and dressing areas
• Modern hallways and entrance spaces
• Bedroom wall lighting
• Contemporary kitchens
• Spaces where horizontal or vertical mounting is useful

• Two G9 light sources provide illumination from both sides of the central mounting point.
• Clear ribbed glass adds texture while allowing light from the bulbs to remain visible.
• Satin brass finish introduces a warm metallic detail to the room.
• Can be installed horizontally or vertically to suit the available wall space.
• IP44 protection makes the fitting suitable for bathroom Zone 2.
• Replaceable G9 bulbs allow the light source to be changed without replacing the fitting.
• Compatible with LED bulbs up to the verified 7W maximum per lamp holder.
• Class 2 double-insulated construction does not require an earth connection.

• Provides a decorative two-light solution for bathrooms and other interior walls.
• Horizontal or vertical mounting offers greater flexibility around mirrors and architectural features.
• IP44 protection gives confirmed suitability for bathroom Zone 2.
• Replaceable G9 LED bulbs provide a choice of suitable colour temperatures and dimmable options.
• The combination of satin brass and ribbed clear glass works with a wide range of contemporary interiors.

Can the Searchlight Imperial 29982SB be used in a bathroom?

Yes. The fitting has an IP44 rating and Searchlight's installation instructions confirm that it is suitable for bathroom Zone 2. Installation should still comply with the electrical regulations applicable to the location.

Can this wall light be fitted horizontally or vertically?

Yes. The Imperial 29982SB is designed to be mounted in either orientation. This makes it suitable for positioning above a mirror horizontally or alongside a mirror vertically, depending on the available wall space.

What bulbs does the Imperial 29982SB use?

It requires two replaceable G9 LED bulbs, with a verified maximum of 7W LED per bulb. The bulbs are not supplied, so suitable G9 lamps need to be purchased separately.

Is the Searchlight Imperial wall light dimmable?

It is compatible with dimmable G9 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

How large is the fitting?

The fitting measures 37 cm in length, 14 cm in width and 10 cm in height, with a projection of 14 cm. When installed vertically, the 37 cm length runs up and down the wall rather than across it.