Leon - Bronze Up & Down LED Wall Lamp

The Leon features a sculptural, half-moon shape with a gently curved front and an upward-sweeping profile. Its bronze-toned sand finish introduces subtle texture and a warm metallic appearance without relying on elaborate decoration.

Constructed from iron, the fitting has a solid, enclosed front that conceals the integrated LED components from direct view. Light emerges above and below the curved body, making the illuminated wall part of the overall design.

At 27 cm wide and 15 cm high, the Leon has a noticeable horizontal presence without extending excessively into the room. The 10 cm projection creates additional depth and definition.

The Leon uses a built-in 13W LED light source with a manufacturer-specified output of 1132 lumens. Its 2700K warm white colour temperature is suited to domestic spaces where softer, warmer lighting is preferred.

The curved housing directs illumination both upwards and downwards. This creates two areas of light on the surrounding wall and provides indirect illumination rather than relying on an exposed bulb facing into the room.

Because the LED is integrated into the fitting, no separate bulbs or lampholders are required. The light source is supplied as part of the complete wall light.

The Leon is non-dimmable and operates at a fixed brightness. It is designed for mains-wired wall installation and requires an earth connection, as confirmed by its Class I electrical classification.

With an IP20 rating, the fitting is intended for dry indoor environments rather than outdoor locations or areas exposed to moisture.

• Hallways and corridors where upward and downward wall illumination can complement ceiling lighting.
• Living rooms requiring a decorative source of warm ambient light.
• Bedrooms where indirect wall lighting is preferred to an exposed light source.
• Feature walls where the curved bronze fitting can form part of the interior design.
• Contemporary and modern interiors with architectural details and clean lines.
• Hotel bedrooms, lounges and dry indoor hospitality spaces.
• Coordinated wall-light installations along longer interior walls or passageways.

• Integrated 13W LED - provides built-in illumination without requiring replacement bulbs at installation.
• 1132 lumen output - delivers a defined level of light for supplementary room illumination.
• 2700K warm white light - produces a warmer colour appearance suitable for living and sleeping areas.
• Upward and downward light distribution - illuminates the wall in two directions for a decorative architectural effect.
• Bronze-toned sand finish - adds texture and a warm metallic detail to the interior.
• Curved half-moon profile - creates a distinctive shape while concealing the light source.
• Iron construction - provides a metal housing for the integrated lighting components.
• 27 cm width - gives the fitting a defined horizontal presence on the wall.
• IP20 protection - suitable for use in dry indoor locations.
• Class I construction - designed for installation with a protective earth connection.

• Combines a distinctive architectural wall-light design with practical upward and downward illumination.
• Provides warm white lighting through an integrated LED, eliminating the need to select separate bulbs.
• Offers an alternative to conventional wall lights with visible lamps or fabric shades.
• The bronze finish and curved shape can complement contemporary interiors with warm neutral colours and metallic accents.
• Suitable for individual feature-wall installations or repeated placement along hallways and corridors.
• Made by Searchlight, an established decorative lighting manufacturer supplying a wide range of indoor lighting designs.

Does the Searchlight Leon 22023BZ require separate bulbs?

No. The Leon has a built-in 13W LED light source, which is included with the fitting. There is no need to purchase an E14, E27 or other replaceable bulb. The integrated LED provides 1132 lumens of warm white illumination.

Can the Leon LED wall light be dimmed?

No. The Searchlight Leon 22023BZ is a non-dimmable integrated LED wall light. It operates at a fixed brightness and is not designed for adjustable dimming control.

What lighting effect does the Leon wall light produce?

The fitting directs warm white light both upwards and downwards, illuminating the surrounding wall in two directions. Its curved metal body conceals the LED source, making it suitable for decorative wall illumination and supplementary ambient lighting.

Is the Leon suitable for bathrooms or outdoor installation?

The Leon has an IP20 rating and is intended for dry indoor locations. It is not designed for exposure to rain, splashing water or damp outdoor conditions. For bathrooms or exterior walls, choose a fitting with an appropriate IP rating for the installation location.

How large is the Leon wall light and how is it installed?

The fitting measures 27 cm wide, 15 cm high and projects 10 cm from the wall. It is designed for fixed, mains-wired installation using a wall-mounting bracket. As a Class I electrical fitting, it requires a protective earth connection.