Horizon - Round Glass with Crystal Ceiling/Wall Lamp

Horizon has a circular, gently curved glass shade with a frosted or sanded appearance that conceals the bulb and softens its direct glare. At the centre are nine square clear crystal windows arranged as a decorative geometric feature. A metal trim completes the shallow round profile. At approximately 30 cm in diameter and 10 cm deep, the fitting sits close to the ceiling and has a neat, understated shape, while the crystal detailing adds visual interest when the light is switched on.

A single E27 lamp sits behind the curved glass shade, illuminating the panel from within and highlighting the nine clear crystal windows. The frosted glass helps diffuse the light rather than leaving the bulb directly exposed.

The bulb is not included, so an appropriate E27 LED lamp can be selected separately. A product-specific maximum of 10W LED per bulb is specified. The fitting is compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

With an IP20 rating, Horizon is intended for dry indoor areas and should not be treated as a bathroom or outdoor fitting.

• Bedrooms where a compact decorative ceiling light is preferred
• Hallways and landings with limited ceiling clearance
• Living rooms requiring a low-profile central fitting
• Dining areas with standard or lower ceiling heights
• Contemporary interiors with glass and crystal details
• Dry indoor rooms where an IP20 fitting is appropriate

• Shallow 10 cm profile keeps the fitting close to the ceiling.
• 30 cm diameter makes it suitable for a range of smaller and medium-sized spaces.
• Frosted glass helps soften direct glare from the bulb.
• Nine clear crystal windows add decorative sparkle to the illuminated centre.
• Replaceable E27 bulb allows the light colour and output to be selected separately.
• LED compatible, with a verified maximum of 10W LED per bulb.
• Compatible with dimmable E27 bulbs and a suitable dimmer switch.
• Class I construction provides an earthed mains-wired installation.

• Combines the practical proportions of a flush ceiling light with decorative crystal detailing.
• Useful where a hanging pendant would project too far into the room.
• Replaceable E27 lamp gives more flexibility than a permanently integrated light source.
• Frosted glass provides a softer appearance than a fully exposed bulb fitting.
• Dimming compatibility gives additional control when suitable dimmable components are used.

What bulb does the Searchlight Horizon 2198-32 use?

It uses one replaceable E27 bulb. The bulb is purchased separately, so you can select a suitable LED lamp with the brightness and colour temperature required for the room. The verified maximum is 10W LED per bulb.

Is the Horizon 2198-32 dimmable?

Yes. It is compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

Is the bulb included?

No. The E27 bulb must be purchased separately. This gives you the flexibility to choose an appropriate LED bulb according to the light output and colour temperature you prefer.

How far does this light project from the ceiling?

The fitting is approximately 10 cm high and projects around 10 cm from the mounting surface. Its shallow profile makes it particularly useful where ceiling clearance is limited or a hanging pendant is not suitable.

Can this ceiling light be used in a bathroom?

The Horizon 2198-32 has an IP20 rating and is intended for dry indoor locations. It should not be treated as a bathroom-rated fitting or installed where protection from moisture or water is required.