Balls - Clear Glass with Antique Brass 3 Light over Island Fitting

Three spherical clear glass shades are suspended in a straight line from a rectangular ceiling bar finished in antique brass. The transparent glass gives the pendant a light, uncluttered appearance while keeping the bulbs visible as part of the finished design. Metal is used for the frame and ceiling fittings, with glass forming the shades.

This shade is hand-blown, so it is genuinely handmade rather than machine pressed. Small bubbles, subtle tooling marks and slight variation in pattern or colour are natural results of the glass blowing process, not faults.

The pendant uses three E27 replaceable bulbs, positioned separately along the 86 cm bar to distribute light across a longer surface. The clear glass shades do not conceal the lamps, so the appearance and colour temperature of the chosen bulbs will contribute noticeably to the overall look of the fitting.

Bulbs are not included. The fitting is suitable for LED E27 bulbs. The original specification lists a traditional bulb maximum of 60W per bulb. Where LED lamps are used, up to 8W LED per bulb is the recommended replacement wattage.

Compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

The suspension is height adjustable during installation, with a verified minimum height of 23 cm and maximum height of 150 cm.

• Kitchen islands and peninsulas
• Dining tables
• Breakfast bars
• Open-plan kitchen and dining areas
• Interiors with antique brass accents
• Contemporary rooms with decorative glass lighting
• Spaces where a linear three light arrangement suits the furniture below

• Three E27 light sources provide illumination from separate points along the bar.
• 86 cm linear format is suited to longer tables, islands and breakfast bars.
• Clear glass shades keep the design visually open and leave the bulbs visible.
• Antique brass finish introduces a warm decorative contrast to the transparent glass.
• Adjustable suspension allows the installed height to be adapted to the room and surface below.
• Replaceable E27 lamps give flexibility when choosing LED brightness and colour temperature.
• Compatible with dimmable E27 bulbs and a suitable dimmer switch.
• Class 1 construction is designed for an earthed mains electrical installation.

• The three light bar layout is practical above long rectangular surfaces where one central pendant may provide less even coverage.
• Clear hand-blown glass gives each shade individual character while retaining a simple spherical form.
• The antique brass finish works well where warmer metallic detailing is preferred over polished chrome.
• Adjustable height provides installation flexibility for different ceiling heights and furniture arrangements.
• Standard E27 lampholders make it straightforward to select suitable replaceable LED bulbs.

Are the bulbs included?

No. Three E27 bulbs need to be purchased separately. LED bulbs are suitable, with up to 8W LED per bulb used as the recommended replacement wattage where no product-specific LED maximum is stated.

Can the pendant be dimmed?

Yes. It is compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

Can the hanging height be adjusted?

Yes. The suspension can be adjusted during installation. The verified height range is from 23 cm minimum to 150 cm maximum, helping the fitting suit different ceiling heights and the surface positioned below it.

Where is this light best positioned?

Its 86 cm three-light bar layout is particularly suitable above kitchen islands, breakfast bars and dining tables. The linear arrangement places three separate light sources along the length of the surface rather than concentrating them at one central point.

Is it suitable for a bathroom or outdoor installation?

No. The fitting is rated IP20, so it is intended for dry indoor locations rather than bathrooms requiring a higher IP rating or outdoor areas exposed to moisture.