Sheffield - IP44 Dark Grey 2 Light Wall Lamp (bulbs excluded)

The Sheffield has a simple rectangular body in a grey finish, creating a contemporary architectural appearance rather than a traditional lantern style. Its construction combines metal with clear glass and polycarbonate elements. Openings at the top and bottom expose the light through clear sections, producing the characteristic up and down lighting effect. At 24 cm high and 11 cm wide, the fitting has a compact vertical profile that works well individually or as a matching pair beside an entrance or along an exterior wall.

Two GU10 lampholders position one bulb towards the top of the fitting and one towards the bottom. This creates separate upward and downward light, helping to illuminate the wall above and below while also highlighting the shape and texture of the exterior surface.

Bulbs are not included, so suitable GU10 LED bulbs can be selected according to the light level and colour temperature required. The replaceable-bulb design also means the light source can be changed without replacing the complete wall fitting.

Compatible with dimmable GU10 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

The IP44 rating provides protection against splashing water, making the fitting suitable for appropriate outdoor wall locations such as porches, entrances, patios and sheltered exterior areas.

• Front entrances and porch areas
• Patio and terrace walls
• Exterior walls beside side or rear doors
• Modern house facades
• Installing as a pair beside an entrance
• Highlighting exterior wall surfaces with up and down light
• Locations where a compact 11 cm projection is useful

• Two light design directs illumination both upwards and downwards.
• IP44 rated for suitable outdoor wall installations.
• Grey finish complements contemporary exterior colour schemes.
• Clear glass and polycarbonate sections allow light to pass from both ends of the fitting.
• Uses two replaceable GU10 bulbs, providing flexibility when selecting LED lamps.
• LED compatible for lower energy consumption when suitable GU10 LED bulbs are fitted.
• Compact 24 cm height and 11 cm projection suit areas where a large projecting lantern is not required.
• Class 1 earthed construction for mains-wired installation.

• Provides an architectural up and down lighting effect from a single wall fitting.
• Replaceable GU10 lamps make it possible to choose a suitable LED brightness and colour temperature.
• The understated rectangular shape works particularly well with contemporary exterior architecture.
• Its IP44 rating makes it practical for suitable exterior wall applications.
• The relatively shallow 11 cm projection helps keep the fitting neat and unobtrusive on the wall.

Are the bulbs included with the Searchlight Sheffield 1002-2GY?

No. This version is supplied without bulbs and requires two GU10 bulbs. GU10 LED bulbs are compatible, allowing you to select a suitable brightness and colour temperature for your outdoor lighting scheme.

Does this light shine upwards and downwards?

Yes. The fitting contains two separate GU10 lampholders, with light directed through the clear sections at the top and bottom. This produces an up and down lighting effect across the exterior wall.

Can the Sheffield 1002-2GY be used outdoors?

Yes. It has an IP44 rating, providing protection against splashing water. This makes it suitable for appropriate exterior wall locations such as entrances, porches, patios and sheltered walls.

Can this outdoor wall light be dimmed?

It is compatible with dimmable GU10 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

How far does the light project from the wall?

The fitting projects 11 cm from the wall. Its compact rectangular profile makes it useful where a modern exterior light is wanted without the deeper projection associated with many traditional outdoor lanterns.