Venice W - Antique Gold 2 Light Wall Lamp with Crystal

The Venice W has an ornate, decorative appearance suited to interiors where crystal and warm metallic finishes form part of the scheme. Its metal frame is in an antique gold finish and is paired with clear crystal elements arranged around the two light sources. The transparent crystal contrasts with the warm gold colouring and becomes more visually prominent when the lamps are switched on.

Measuring approximately 29 cm high and 20 cm wide, the wall light is substantial enough to work as a decorative feature while remaining relatively compact. The 10 cm projection is also useful where a deeper wall fitting would be impractical.

Two separate G9 lampholders provide light from two points within the crystal decoration. The clear crystal allows light to pass through and reflect from its surfaces, adding visual sparkle around the fitting rather than concealing the lamps behind an opaque shade.

The Venice W requires two G9 bulbs, which are not included. The verified maximum is 3.5W LED per bulb, making the fitting suitable for modern G9 LED lamps within this limit.

As a mains-wired wall fitting with replaceable G9 bulbs, it is compatible with dimmable G9 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

Its IP20 rating means it is intended for dry indoor locations and should not be treated as a bathroom or outdoor wall light.

• Living rooms requiring decorative accent lighting
• Dining rooms with gold or crystal details
• Bedrooms where a decorative wall light is preferred to a plain fitting
• Hallways and entrance areas in dry indoor locations
• Classic and elegant interior schemes
• Rooms using antique gold finishes as part of the decor
• Paired wall-light arrangements on either side of a feature or furniture piece

• Two G9 light sources distribute illumination from more than one point.
• Clear crystal decoration reflects and refracts light from the lamps.
• Antique gold finish provides a warm decorative appearance.
• Approximately 10 cm projection keeps the fitting relatively close to the wall.
• Replaceable G9 lamps allow the bulbs to be changed when required.
• Compatible with LED G9 bulbs up to the verified 3.5W maximum per bulb.
• Dimming is possible with suitable dimmable G9 lamps and a compatible dimmer switch.
• Class 2 double-insulated construction provides additional electrical insulation.

• Combines practical wall lighting with prominent clear crystal decoration.
• The antique gold finish works naturally with warm metallic interior details.
• Its two-light arrangement gives the crystal more than one illuminated focal point.
• Compact depth makes it useful where projection from the wall needs to be limited.
• Replaceable G9 bulbs give flexibility over light output and colour temperature within the permitted wattage.
• Suitable for use as an individual decorative light or as part of a coordinated pair.

Are the bulbs included with the Venice W wall light?

No. Two G9 bulbs need to be purchased separately. The verified maximum is 3.5W LED per bulb, so replacement lamps should remain within this limit.

Can this wall light be dimmed?

Yes. It is compatible with dimmable G9 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

Is the Venice W suitable for a bathroom?

The fitting has an IP20 rating and is intended for dry indoor locations. It should not be selected as a bathroom fitting where a higher IP rating is required for the intended installation zone.

How far does the light project from the wall?

The Venice W projects approximately 10 cm from the wall. It is also around 29 cm high and 20 cm wide, providing decorative presence without the depth of many larger crystal wall fittings.

Is this fitting handmade?

Yes. The fitting is handmade, so small tooling marks and slight variations in the pattern or finish can occur naturally as part of the manufacturing process.