Milan 1 - Painted Gold 5 Light Centre Fitting

The Milan 1 uses a round metal structure finished in painted gold, with square and rectangular geometric forms arranged around the fitting. This open construction keeps the five light sources visually prominent and gives the design a decorative architectural character rather than the softer appearance of a shaded pendant.

At approximately 60 cm in diameter, it is large enough to act as a visual centrepiece in a dining area, living room or other interior where the ceiling light forms an important part of the room design.

Five E27 lamp holders position the light across several points around the fitting rather than concentrating it in a single central bulb. The lamps are not included, so the brightness and colour temperature can be selected to suit the room and intended use.

The fitting is suitable for E27 LED bulbs up to the verified 10W LED maximum per bulb. As the lamp positions are visually exposed within the open metal design, the appearance of the chosen bulbs will also contribute to the finished look.

The chain suspension allows the overall height to be adjusted between approximately 49 cm and 163 cm during installation. Compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

• Dining rooms where a decorative centre fitting is required
• Positioning above a dining table
• Living rooms with sufficient ceiling height
• Bedrooms with decorative contemporary interiors
• Modern classic interiors using warm metallic finishes
• Rooms where adjustable suspension height is useful
• Dry indoor areas requiring an IP20 ceiling fitting

• Five separate lamp holders distribute illumination from multiple points.
• Painted gold finish gives the fitting a warm decorative appearance.
• Open geometric metal structure makes the bulbs part of the visible design.
• 60 cm diameter provides a substantial central feature for larger furniture arrangements.
• Adjustable chain suspension offers an installation range from approximately 49 cm to 163 cm.
• E27 lamp holders provide a wide choice of compatible LED bulbs.
• Maximum 10W LED per bulb supports efficient modern light sources.
• Class II double-insulated construction provides an additional electrical safety measure.

• Combines a decorative gold finish with a distinctive geometric form.
• Five light sources make it practical for rooms needing illumination from several points.
• Adjustable suspension makes it easier to set an appropriate height above a table or within a room.
• Replaceable E27 bulbs allow the light output and colour temperature to be selected independently.
• Open construction provides a more visually expressive alternative to a conventional shaded pendant.

Are the bulbs included with the Prism Milan 1?

No. The Milan 1 requires five E27 bulbs, which must be purchased separately. This allows you to choose the brightness and colour temperature that best suit the room.

Can the Milan 1 be dimmed?

Yes, it is compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

Can the hanging height be adjusted?

Yes. The chain suspension can be adjusted during installation, with an overall fitting height of approximately 49 cm to 163 cm. This makes it easier to position the light appropriately above a dining table or within a taller room.

Is the Milan 1 suitable for a bathroom?

The fitting is rated IP20 and is intended for dry indoor areas. It should not be treated as a bathroom-rated light where protection against moisture or splashing water is required.

How large is the Milan 1 ceiling fitting?

The fitting measures approximately 60 cm in diameter. Its adjustable suspension gives an overall height between approximately 49 cm and 163 cm, so both the width and required hanging clearance should be considered before installation.