Zurich 1 - Matt Coffee Pendant with Ombre Copper Glass

A circular metal ceiling plate and suspension in a matt coffee finish support the 25 cm glass shade. The shade combines transparent glass with a copper ombre colour effect, creating a warm decorative appearance while leaving the light source visible through the glass.

This shade is hand blown, so it is genuinely handmade rather than machine pressed. Small bubbles, subtle tooling marks and slight variation in pattern or colour are natural results of the glass blowing process, not faults.

The Zurich 1 uses one replaceable E27 bulb, allowing the light output and colour temperature to be selected to suit the room. It is LED compatible and has a verified maximum of 10W LED for the single lamp holder. The bulb is not included.

The transparent areas of the copper ombre glass allow the bulb to remain visible, so the appearance of the chosen lamp will contribute to the overall look of the pendant. The fitting is compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

Its suspension can be adjusted during installation from approximately 39 cm to 149 cm overall height. This provides flexibility when positioning the pendant over a table, worktop or open floor area.

• Dining areas and smaller dining tables
• Kitchen islands and breakfast bars, particularly in repeated arrangements
• Hallways and entrance areas
• Living rooms requiring a decorative single pendant
• Bedrooms, including bedside pendant installations
• Contemporary interiors with warm brown, bronze or copper tones
• Indoor dry areas where an IP20 fitting is appropriate

• Hand-blown glass shade gives each pendant natural individual variation.
• Copper ombre glass adds warm colour while retaining transparent areas around the bulb.
• Matt coffee finish complements the brown and copper tones of the shade.
• Single E27 lamp holder provides a wide choice of compatible LED bulbs.
• Maximum 10W LED bulb capacity provides a clear specification when selecting a lamp.
• Height adjustable at installation from approximately 39 cm to 149 cm.
• 25 cm diameter makes the pendant suitable for individual use or grouped installations.
• Compatible with dimmable E27 bulbs and a suitable dimmer switch.
• Class 2 double-insulated construction.

• Combines decorative hand-blown glass with a distinctive copper ombre effect.
• Adjustable suspension offers flexibility for different ceiling heights and furniture layouts.
• Replaceable E27 bulb gives control over light colour, brightness and dimming capability.
• Compact 25 cm shade works as a single feature pendant or as part of a row of matching lights.
• Warm matt coffee and copper finishes provide an alternative to common black, chrome or brass pendant designs.

Is the bulb included with the Zurich 1 pendant?

No. The pendant requires one E27 bulb, which must be purchased separately. It is LED compatible, and the verified maximum is 10W LED for the single lamp holder.

Can this pendant be dimmed?

Yes. It is compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

Can the hanging height be adjusted?

Yes. The overall height can be adjusted during installation from approximately 39 cm to 149 cm. This makes it easier to position the shade at an appropriate level above a table, island or open floor area.

Is every Zurich 1 glass shade exactly the same?

No. The shade is hand-blown, so small bubbles, tooling marks and slight variations in colour or pattern can naturally occur. These characteristics are part of the glass blowing process rather than manufacturing faults.

Is the Zurich 1 suitable for bathrooms or outdoor use?

No. The fitting is rated IP20, so it is intended for suitable dry indoor areas. It should not be selected for outdoor locations or bathroom zones that require a higher level of protection against moisture.