Hazel - Satin Nickel Lantern Pendant

The Hazel pendant uses a classic lantern form with a metal frame in a satin nickel finish and clear glass panels around the light source. The combination gives the fitting a lighter visual profile than a pendant with an opaque shade, while the geometric frame provides the decorative structure. Its 18 cm diameter keeps the lantern relatively compact, making it suitable for spaces where a larger chandelier or wide pendant could feel too dominant. The clear glass also leaves the selected E27 bulb visible, so the appearance of the lamp can contribute to the finished look.

This pendant uses one E27 replaceable bulb, which is not included. It is compatible with LED bulbs up to the verified maximum of 10W LED per bulb. Clear glass panels surround the lamp without an opaque diffuser, allowing light to pass through the sides of the lantern while keeping the bulb visible.

The suspension is height adjustable at the point of installation, with a minimum overall height of 44.5 cm and a maximum of 185 cm. This provides useful flexibility when positioning the pendant in a hallway, entrance or landing with a higher ceiling.

As a mains-wired fitting with a replaceable E27 lampholder, it is compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

• Hallways and entrance areas needing a decorative ceiling pendant
• Gallery landings and stairwell areas with sufficient ceiling height
• Dining areas where a compact lantern-style pendant suits the scheme
• Traditional and modern classic interiors
• Rooms where clear glass and a satin nickel finish complement existing fittings
• Higher ceilings where the adjustable suspension can be used effectively

• Single light lantern design creates a decorative focal point without requiring a wide fitting.
• Satin nickel finish provides a clean metallic appearance suited to a range of interior schemes.
• Clear glass panels keep the bulb visible and allow light to pass through the sides of the lantern.
• Uses a replaceable E27 bulb, making LED lamp selection straightforward.
• Supports an E27 LED bulb up to 10W.
• Adjustable installation height from 44.5 cm to 185 cm provides flexibility for different ceiling heights.
• Compatible with dimmable E27 bulbs when used with a suitable matched dimmer switch.
• IP20 construction is intended for dry indoor locations.

• Combines the familiar proportions of a lantern with a lighter satin nickel finish.
• The compact 18 cm diameter works where a larger decorative pendant would take up too much visual space.
• A generous adjustable suspension makes it practical for both standard installations and taller interior spaces.
• Replaceable E27 lighting gives flexibility when choosing the bulb output and colour temperature.
• Clear glass panels make the selected bulb part of the overall appearance of the fitting.

What bulb does the Prism Hazel 9310 use?

The pendant uses one E27 replaceable bulb. It is compatible with an LED bulb up to a verified maximum of 10W LED per bulb. The bulb is not supplied with the fitting, so it needs to be purchased separately.

Can the height of the pendant be adjusted?

Yes. The suspension can be adjusted during installation. The overall height ranges from a minimum of 44.5 cm to a maximum of 185 cm, giving flexibility when installing the fitting in rooms with different ceiling heights.

Is the Prism Hazel 9310 dimmable?

It is compatible with dimmable E27 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

Can this pendant be used in a bathroom or outdoors?

The fitting has an IP20 rating and is intended for dry indoor locations. It should not be treated as a bathroom or outdoor fitting where protection from moisture or water is required.