Cherry - LED Temperature Colour Changing Flush Ø28 cm

The Cherry has a grey/silver metal frame paired with a white acrylic diffuser. The outer rim features a raised, diamond-cut texture that catches the light and adds visual interest to what would otherwise be a plain flush fitting. The centre diffuser has a fine, crystal-sand style finish, giving an even, softly sparkling surface rather than a flat white panel. At just 10 cm high, the fitting sits close to the ceiling for a neat, unobtrusive look.

The Cherry uses a single integrated LED module rated at 18W and producing 1500 lumens, which is a good output for a bedroom, hallway or smaller living space. Colour temperature can be switched between three settings using the supplied remote control:

• 3000K - warm white, suited to relaxed everyday use
• 4000K - a more neutral white for general living areas
• 5000K - daylight white for a brighter, crisper feel

Because the LED is integrated rather than a replaceable bulb, there is no need to source matching lamps later on. The remote control also means the colour temperature can be changed without an electrician or additional wiring.

• Bedrooms
• Hallways
• Living rooms
• Landings and stairwells
• Rooms with low ceilings
• Traditional and contemporary interiors

• Remote-controlled colour temperature switching, so light tone can be adjusted without extra wiring
• Integrated LED means no bulbs to buy or replace over the life of the fitting
• Low 10 cm profile suits rooms where ceiling height is limited
• Decorative acrylic rim adds detail without needing a larger, more elaborate fitting
• Class 1 (earthed) construction for a properly grounded electrical connection
• Straightforward flush mounting suitable for standard ceiling roses

• Three colour temperatures in one fitting removes the need to choose a single fixed tone at the time of purchase
• A compact, flush design works where pendant or larger fittings would not
• The textured acrylic detailing gives a more considered look than a plain diffuser flush
• No bulb changes to worry about, since the LED is built in

Are bulbs included?
Yes. The Cherry uses a built-in LED module rated at 18W, so there is no separate bulb to buy or fit.

Can I change the colour temperature?
Yes. The included remote control lets you switch between 3000K warm white, 4000K neutral white and 5000K daylight white.

Is it suitable for a bathroom?
No. With an IP20 rating, the Cherry is designed for dry indoor rooms only and is not suitable for bathrooms or other damp locations.

Can it be used outdoors?
No. This is an indoor fitting only, rated IP20.

What happens if the LED eventually fails?
Because the LED is integrated into the fitting rather than a separate replaceable bulb, the whole unit would need to be replaced if the LED module fails.