The Ideal Lux Atlas AP2 Bianco is a two-light wall fitting with a sculptural arrangement of slim arms and rounded white glass diffusers. Measuring approximately 30 cm wide and 30 cm high, it creates a decorative focal point without taking up excessive wall space. The matt white finish gives the fitting a clean, understated appearance that works particularly well in contemporary bedrooms, living rooms, hallways and dining areas. Two G9 LED bulbs are included, so the light can be used without purchasing separate lamps. Its acid-etched blown glass diffusers soften the appearance of the light sources and help produce comfortable ambient illumination.
The Atlas AP2 combines a matt white metal base and frame with two intersecting, positionable arms. Each arm ends in a rounded diffuser made from acid-etched white blown glass, creating a balanced composition of straight lines and soft spherical forms.
The all-white colour scheme keeps the design visually light and makes it easy to coordinate with pale walls, neutral interiors and modern furniture. With a projection of approximately 19 cm, the fitting has enough depth to create a noticeable three-dimensional feature while remaining practical for most indoor wall locations.
Two separate G9 light sources distribute illumination from different points across the fitting. The acid-etched white glass diffusers conceal the bulbs and soften their brightness, making the Atlas AP2 suitable for decorative and general ambient lighting rather than concentrated task lighting.
The fitting is supplied with two G9 LED bulbs, each with a maximum verified wattage of 4W. Replacement G9 LED bulbs should remain within this limit.
As a mains-wired wall light with replaceable bulbs, it is compatible with dimmable G9 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly. The included bulbs should only be dimmed when they are specifically marked as dimmable.
The positionable arms allow the visible arrangement to be adjusted during installation. Any adjustment should be completed with the power switched off.
- Contemporary living rooms and dining rooms
- Bedroom feature walls and bedside areas
- Hallways, landings and entrance areas
- Decorative lighting beside mirrors or artwork
- Modern interiors with white or neutral finishes
- Rooms requiring soft ambient wall lighting
- Indoor residential and hospitality settings
- Two light sources provide illumination from more than one point.
- Acid-etched white glass helps soften direct glare from the bulbs.
- Blown glass diffusers give the fitting a smooth, rounded appearance.
- Positionable arms allow the composition to be arranged during installation.
- Matt white finish coordinates easily with light and neutral colour schemes.
- Compact 30 cm width suits walls where a larger fitting may feel intrusive.
- Energy-efficient G9 LED bulbs are included.
- Compatible with dimmable G9 bulbs and a suitable wall dimmer.
- Replaceable bulbs make future lamp replacement straightforward.
- Distinctive combination of slim linear arms and rounded glass diffusers.
- Provides decorative lighting without requiring a large section of wall.
- Included LED bulbs reduce the number of items needed before installation.
- White finish offers a subtle alternative to darker or metallic fittings.
- Suitable for several indoor rooms and decorative applications.
- Part of the coordinated Ideal Lux Atlas lighting collection.
| Brand | Ideal Lux |
|---|---|
| Collection | Atlas |
| Product Code | 352008 |
| EAN | 8021696352008 |
| Product Type | Wall light |
| Finish | Matt white |
| Colour | White |
| Frame Material | Metal |
| Diffuser Material | Blown glass |
| Glass Type | Acid-etched white glass |
| Number of Lights | 2 |
| Bulb Type | G9 LED |
| Maximum Wattage | 4W LED per bulb |
| Bulbs Included | Yes, 2 × G9 LED bulbs |
| LED Compatible | Yes |
| Dimmable | Compatible with dimmable G9 bulbs and a suitable dimmer switch |
| IP Rating | IP20 |
| Width | 300 mm |
| Height | 300 mm |
| Projection | 190 mm |
| Adjustable | Positionable arms |
| Installation Type | Mains-wired wall installation |
| Suitable Location | Indoor use |
Are the bulbs included with the Atlas AP2?
Yes. The fitting is supplied with two G9 LED bulbs. Each light source has a verified maximum wattage of 4W LED, and replacement bulbs should remain within this limit.
Can this wall light be dimmed?
It is compatible with dimmable G9 bulbs when connected to a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly. Check that the included bulbs are marked as dimmable before using them with a dimmer.
Can the arms be repositioned?
The metal arms are described by Ideal Lux as positionable, allowing their visible arrangement to be adjusted during installation. Make any adjustment carefully while the electrical supply is switched off and before regular use.
Is the Atlas AP2 suitable for a bathroom?
The fitting has an IP20 rating and is designed for dry indoor locations. It is not protected against water, so it should not be installed in a bathroom zone or another location where moisture protection is required.
How large is this wall light?
The Atlas AP2 measures 30 cm wide and 30 cm high, with a projection of 19 cm from the wall. Its compact proportions make it suitable for feature walls, hallways, bedrooms and living areas without occupying excessive space.
Product range name and SKU: Atlas - 352008
This product is supplied by Ideal Lux
| Product Info | |
| Brand | Ideal Lux |
| Product Code | 352008 |
| Range Name | Atlas |
| Dimensions | |
| Height (cm) | 30 cm |
| Diameter (cm) | 30 cm |
| Depth (cm) | 19 cm |
| Bulb | |
| Energy Efficiency Class | F |
| Bulb Included | Yes |
| Number of Lights | 2 |
| Lamp Holder Type | G9 |
| Type of Included Bulb | LED (build-in) |
| Colour Temperature (Kelvin) | 3000 K |
| Lumens Output | 510 lm |
| Maximum Wattage (W) | LED 4W |
| Product Finish | |
| Shade / Diffuser Material | Glass |
| Shade / Diffuser Colour | White |
| Frame / Base Material | Metal |
| Frame / Base Colour | White |
| Features | |
| IP Rating | IP20 |
| Class of Insulation | Class 2 (Double Insulated) |
| Switch Type | Mains Operated |
How bright is a light bulb?
Because the Lumen output from different manufacturers will vary. Here's a quick and easy guide to approximate total Lumen output.
Lumens |
Watts |
| 2600 Lumens (lm) | 150W |
| 1600 Lumens (lm) | 100W |
| 1100 Lumens (lm) | 75W |
| 800 Lumens (lm) | 60W |
| 450 Lumens (lm) | 40W |
Understanding LED colour temperature and the Kelvin scale
Colour temperature 2000K to 3000K, the light produced is often referred to as a "warm white", "soft white", occasionally called a "candle white". It ranges from orange-ish to yellow-ish white in appearance. This kind of light is attractive, enjoyable, comfortable and relaxing.
Colour temperature 3100K to 4500K, the light produced is often referred to as a "neutral white", "bright white" or "natural white". Light sources within this range will emit a more neutral white light and may even have a slightly blue tint. This kind of light is bright, vibrant and clean appearing.

Colour temperature 4600K and above, the light produced is often referred to as a "cool white", "pure white" or "day white". Light sources in this range will have a blue-ish white tint to them. The higher the number, the more blueish it will appear. This kind of light will appear crisp, invigorating and energetic.
Please refer to full guide described in the main LED bulbs description