Dynamite - White Spotlight ∅ 4 cm

The Dynamite spotlight has a narrow cylindrical body with a simple round mounting base. Both sections are finished in white, creating a coordinated appearance that can blend neatly with pale walls and ceilings.

Its metal construction and minimal detailing give the fitting a precise, contemporary look without making it visually dominant. The compact 4 cm diameter is especially useful where a larger spotlight base would appear too prominent. An adjustable head adds a practical mechanical detail while preserving the streamlined shape of the design.

This single-light spotlight uses one replaceable GU10 bulb. A 4W GU10 LED bulb is included, so the fitting is ready for use after installation. The included lamp has a CRI of 90, supporting more accurate and natural-looking colour reproduction than a standard lower-CRI light source.

The adjustable diffuser allows the beam to be redirected towards the area that needs illumination. This makes the light suitable for highlighting artwork, shelves, kitchen surfaces or architectural details, as well as providing focused general lighting in smaller spaces.

The fitting is compatible with dimmable GU10 bulbs when paired with a suitable dimmer switch. The bulbs and dimmer switch need to be matched to each other for dimming to work properly.

• Focused lighting in hallways and landing areas
• Highlighting pictures, shelving or decorative features
• Task lighting above kitchen work surfaces
• Compact bedrooms, studies and home offices
• Modern living rooms with understated lighting schemes
• Retail displays and other dry commercial interiors
• Wall or ceiling installation where space is limited

• Adjustable spotlight head directs the beam where it is needed
• Compact 4 cm diameter keeps the fitting visually discreet
• White finish coordinates easily with pale walls and ceilings
• Replaceable GU10 bulb avoids reliance on a permanent LED module
• 7W LED bulb included for convenient initial installation
• CRI 90 included bulb supports accurate colour appearance
• Suitable for installation as a wall or ceiling spotlight
• IP20 rating is appropriate for dry indoor locations

• A useful option when a full-size spotlight would look too bulky
• Provides directional lighting from a small surface-mounted fitting
• Allows the light source to be replaced when required
• Works in both residential and suitable commercial interiors
• Can be positioned on either a wall or ceiling to suit the application

Is a bulb included with the Ideal Lux Dynamite 347639?

Yes. The spotlight is supplied with a 4W GU10 LED bulb. The bulb is replaceable, so another compatible GU10 lamp can be fitted when the original reaches the end of its service life.

Can the direction of the light be adjusted?

Yes. The cylindrical spotlight head is adjustable, allowing the beam to be aimed towards a picture, shelf, work surface or another selected area of the room.

Can this spotlight be dimmed?

The fitting can be used with a dimmable GU10 bulb and a suitable compatible dimmer switch. Dimming capability depends on the bulb installed, so the included bulb should not be assumed to be dimmable unless it is marked accordingly.

Is it suitable for a bathroom or outdoor area?

No. The IP20 rating is intended for dry indoor spaces and does not provide protection against water. It should not be installed outdoors or within bathroom zones that require a higher IP rating.

Can it be mounted on either a wall or ceiling?

Yes. Its compact surface-mounted construction allows it to be used as either a wall spotlight or a ceiling spotlight, depending on the required lighting direction and installation position.