Snow - IP65 White Flush 3000K

The Snow PL has a clean square profile measuring 25 cm wide by 25 cm deep, with a slim overall height of 5.5 cm. Both the base and diffuser are white polycarbonate, creating a restrained all-white finish that works well with modern exterior architecture. The broad diffuser covers most of the visible underside and softens the appearance of the integrated light source. Its fixing system is designed without visible screws on the finished exterior, helping the fitting maintain a simple, uncluttered look once installed.

An integrated 18W SMD LED module provides warm white light at 3000K. The manufacturer specifies a light beam flux of 1900 lumens and a useful light flux of 1360 lumens, with a CRI above 90 for good colour rendering. Light is emitted diffusely through the broad polycarbonate diffuser, making the fitting suitable for general exterior illumination rather than a narrow directional beam.

The LED source is non-replaceable and is rated for 50,000 hours at 25°C. This model operates by standard on/off switching and is explicitly non-dimmable. Its IP65 rating provides complete protection against dust ingress and protection against water jets. The specified operating temperature range is -15°C to +45°C.

• Covered entrances and exterior doorways
• Porches and sheltered outdoor seating areas
• Terraces with suitable ceiling mounting positions
• Outdoor corridors and covered passageways
• Contemporary homes requiring a discreet square ceiling light
• Locations where an IP65 rated exterior fitting is required

• Integrated 18W LED source removes the need to select or replace a separate bulb.
• Warm white 3000K output suits welcoming exterior entrance and terrace lighting.
• 1950 lumen light beam flux provides a useful level of general exterior illumination.
• Diffuse light emission spreads illumination across the area rather than concentrating it into a narrow beam.
• CRI above 90 helps colours appear natural under the light.
• IP65 protection makes the fitting suitable for demanding outdoor locations when correctly installed.
• Compact 25 cm square dimensions and a 5.5 cm profile keep the fitting visually unobtrusive.
• Class II insulation provides double-insulated electrical protection.

• Combines a slim square design with an outdoor-rated IP65 construction.
• Provides warm white integrated LED lighting without requiring separate bulbs.
• High CRI above 90 makes it suitable where accurate colour appearance is desirable.
• The white polycarbonate body and diffuser give the fitting a simple contemporary appearance.
• Its compact depth is useful where a low-profile exterior ceiling fitting is preferred.

Is the Ideal Lux Snow 326238 suitable for outdoor use?

Yes. The fitting has an IP65 rating, providing complete protection against dust ingress and protection against water jets. This makes it suitable for outdoor ceiling locations when installed correctly and in accordance with the manufacturer's instructions.

Does this ceiling light need a separate bulb?

No. The Snow PL 326238 contains an integrated 18W SMD LED module, so a separate bulb is not required. The LED source is non-replaceable and has a manufacturer-stated rated life of 50,000 hours at 25°C.

Is the Ideal Lux Snow 326238 dimmable?

No. The manufacturer's technical data explicitly specifies this model as non-dimmable with on/off operation. It should therefore be used with standard switching rather than a dimmer control.

What colour light does the Snow PL 326238 produce?

This version produces 3000K warm white light. The manufacturer specifies 1900 lumens of light beam flux and 1360 lumens of useful light flux, with diffuse emission and a CRI above 90.