Style - IP54 Black LED Post 4000K - 50 cm

The Style 322506 has a narrow architectural profile with a black powder-coated aluminium body and a projecting upper section that directs light downwards. An opal plastic diffuser softens the appearance of the LED source while maintaining the fitting's simple geometric look.

At 50 cm high, 13.9 cm wide and 12.5 cm deep, it provides a noticeable but relatively compact presence beside paths, patios and landscaped areas. The restrained black finish works particularly well with modern exterior schemes and contemporary architecture.

This bollard uses a built-in 8.5W LED module, so a separate bulb is not required. The light source produces 1050 lumens, with a neutral white colour temperature of 4000K and a colour rendering index above CRI 90.

Direct light emission and a 120° beam angle spread light across the area beside the fitting, making it useful for marking paths, entrances and outdoor circulation routes. The integrated LED has a stated 30,000-hour life and is not user-replaceable. The electronic driver is built in and may be replaced by qualified personnel only.

The fitting uses on/off control and is explicitly non-dimmable.

• Garden paths and pedestrian routes
• Driveway edges and entrance areas
• Patios and landscaped outdoor spaces
• Modern and contemporary exterior schemes
• Residential gardens requiring fixed low-level lighting
• Commercial landscaping where IP54 outdoor lighting is appropriate

• Integrated 8.5W LED removes the need to purchase a separate bulb.
• 4000K neutral white light provides clear functional illumination for outdoor areas.
• 1050 useful lumens provide practical light output from the completed fitting.
• 120° beam angle distributes light over a broad area beside the bollard.
• CRI above 90 provides strong colour rendering for illuminated surfaces and surroundings.
• IP54 protection makes the fitting suitable for appropriate outdoor installations.
• Powder-coated aluminium body provides a clean architectural appearance.
• Built-in electronic driver keeps the power supply contained within the fitting.
• 50 cm height suits pathway and landscape lighting without requiring a tall post.

• A slim black bollard design that integrates easily into contemporary outdoor settings.
• Integrated LED lighting avoids ongoing bulb selection and compatibility concerns.
• Direct 120° light distribution is well suited to paths and surrounding ground areas.
• IP54 protection supports installation in exposed exterior locations where splashing water may occur.
• High colour rendering above CRI 90 helps exterior colours and finishes appear more natural under the light.

Does this outdoor bollard need a separate bulb?

No. The Ideal Lux Style 322506 has an integrated 8.5W LED module, so there is no separate bulb to purchase or fit. The LED source is built into the bollard and is not designed for user replacement.

Is the Ideal Lux Style 322506 dimmable?

No. The manufacturer specifies this model as non-dimmable with on/off control. It should therefore be used as a standard switched outdoor light rather than with a dimming control system.

Is it suitable for outdoor use?

Yes. The fitting is specifically designed as an outdoor ground-mounted bollard and has an IP54 rating. This provides protection against limited dust ingress and splashing water, making it suitable for appropriate exterior installations.

What colour light does it produce?

The integrated LED produces 4000K neutral white light. It provides 790 useful lumens from the fitting, with a 120° beam angle and a colour rendering index above CRI 90.

How large is the bollard?

The fitting measures 50 cm high, 13.9 cm wide and 12.5 cm deep. Its relatively slim proportions make it suitable for positioning beside paths, garden borders, entrances and other landscaped areas without using a tall lighting post.